Welcome to the IHoP

[ramos 2]

They don't even want to make the old man throw the SPL hat back on . Didn't let all the secrets get out

[ramos 2]

D@mn you Aaron. Stop it now , I'm gonna need another closet at this rate

<{POST_SNAPBACK}>

there were so few of them and sean was looking for a 6'er or I had reccomended finding one for active,

I swear I should sell my Orion 8004 and 8002 and put a Zapco 650.6 in the back of the sled instead.

<{POST_SNAPBACK}>

Or one of those sexy arse a/d/s

<{POST_SNAPBACK}>

I dont see many left in good shape, so few people appricate A/D/S anymore,

honestly my initial plan was to run the 346i's in my car, now I sorta kick myself for not doing that

<{POST_SNAPBACK}>

You show up with a car full of a/d/s and you might not get it back

[///M5 2,833]

What is Flakko using as a crossover on his tweets? He is asking questions on DIYMA about how low the Cal's can play, but only has a 12dB slope.

[Worlddre 1]

Gonna be one in WV the end of september . We're all gonna meet in Blacksburg probably . Then head up there for the comp

<{POST_SNAPBACK}>

im there

[///M5 2,833]

Gonna be one in WV the end of september . We're all gonna meet in Blacksburg probably . Then head up there for the comp

im there

I think I will be in SoCal that week.

[ramos 2]

*most I've ever seen Aaron post in the hop since joining in Sept*

<{POST_SNAPBACK}>

He's trying to pad my collection of vintage rf , that I'm going to bequeath him upon my death

[Aaron Clinton 2,372]

*most I've ever seen Aaron post in the hop since joining in Sept*

I am not usually an iHop'er because I was more worried about the other sections keeping traffic but at this point any traffic is good, just changes my most posts %'age hehe

[///M5 2,833]

Everyone is in italics --

[mrray13 30]

i jsut replied..but hell, i dunno half of what ramos knows...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Don't short change yourself my brother . Your a venerable wealth of knowledge. And I enjoy talking with you

lol..i wish! i do enjoy the talking with you and learning off of you, which i have done for 4 years now. alot of the knowledge i have comes from people like yourself. nah, your a whole other league brother..

but i thank you anyway!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[ramos 2]

Gonna be one in WV the end of september . We're all gonna meet in Blacksburg probably . Then head up there for the comp

<{POST_SNAPBACK}>

im there

<{POST_SNAPBACK}>

Cool , I should get some more info here shortly .

[Worlddre 1]

What is Flakko using as a crossover on his tweets?  He is asking questions on DIYMA about how low the Cal's can play, but only has a 12dB slope.

<{POST_SNAPBACK}>

he bought some crossovers the other day ADS i think

[ramos 2]

i jsut replied..but hell, i dunno half of what ramos knows...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

<{POST_SNAPBACK}>

Don't short change yourself my brother . Your a venerable wealth of knowledge. And I enjoy talking with you

<{POST_SNAPBACK}>

lol..i wish! i do enjoy the talking with you and learning off of you, which i have done for 4 years now. alot of the knowledge i have comes from people like yourself. nah, your a whole other league brother..

but i thank you anyway!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

<{POST_SNAPBACK}>

[///M5 2,833]

*most I've ever seen Aaron post in the hop since joining in Sept*

I am not usually an iHop'er because I was more worried about the other sections keeping traffic but at this point any traffic is good, just changes my most posts %'age hehe

Its good. I like the hop when we banter around, pretty much my only relaxation as in my job I have no colleagues, don't work with anybody, have no peers, and travel a chit ton. Doesn't leave a lot of time for idle work chat which you surprisingly need somehow.

[Worlddre 1]

Gonna be one in WV the end of september . We're all gonna meet in Blacksburg probably . Then head up there for the comp

<{POST_SNAPBACK}>

im there

<{POST_SNAPBACK}>

Cool , I should get some more info here shortly .

<{POST_SNAPBACK}>

cool

[mrray13 30]

i've got to get around...

might be changing jobs, getting back into the welding/fabrication field. i have an interview/weld test if i want to go today....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[///M5 2,833]

What is Flakko using as a crossover on his tweets?  He is asking questions on DIYMA about how low the Cal's can play, but only has a 12dB slope.

he bought some crossovers the other day ADS i think

Don't know why you'd buy a 12dB x-over, unless you run a cone like the CA18RNX. That driver is nuts, I can run it all pass and it doesn't sound much different than crossing it over. Its natural rolloffs are super easy to play with. If anyone is a noob and wants to run active it would be my first choice by far as a driver to recommend. No funny cone breakup, no weird non-linearities, pretty consistent impedance curve, measured t/s are almost dead nuts with published, and it will work with pretty much any tweeter since it will play up to 4k pretty easily.

[///M5 2,833]

i've got to get around...

might be changing jobs, getting back into the welding/fabrication field. i have an interview/weld test if i want to go today....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

My bro-in-law welds stainless for a living, which makes me really want to open up an outdoor kitchen consulting/installation company.

[Aaron Clinton 2,372]

*most I've ever seen Aaron post in the hop since joining in Sept*

I am not usually an iHop'er because I was more worried about the other sections keeping traffic but at this point any traffic is good, just changes my most posts %'age hehe

Its good. I like the hop when we banter around, pretty much my only relaxation as in my job I have no colleagues, don't work with anybody, have no peers, and travel a chit ton. Doesn't leave a lot of time for idle work chat which you surprisingly need somehow.

I am slacking on some region ids on a target here,

....................................................

den den den dadda den den dadda den den den

bahhh bu ba bahhhh bu bahh bahhhh bu bu bah bu bahh bahh

Studio 500

[mrray13 30]

but i dunno if i want to get back into the flashburns, the slag burn, the coming home filthy, even if it is good money....

and besides, i enjoy doing the car audio thing..but where i work is one seriously disorganized zoo....

we literally put the high end jobs on hold repeatly to do the little ones...and then get bitched at for not being done on time......he doesn't understand that when you start and stop a job, you lose more then just the time on the second job. he never figures that shit in...oh well....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Worlddre 1]

What is Flakko using as a crossover on his tweets?  He is asking questions on DIYMA about how low the Cal's can play, but only has a 12dB slope.

<{POST_SNAPBACK}>

he bought some crossovers the other day ADS i think

<{POST_SNAPBACK}>

Don't know why you'd buy a 12dB x-over, unless you run a cone like the CA18RNX. That driver is nuts, I can run it all pass and it doesn't sound much different than crossing it over. Its natural rolloffs are super easy to play with. If anyone is a noob and wants to run active it would be my first choice by far as a driver to recommend. No funny cone breakup, no weird non-linearities, pretty consistent impedance curve, measured t/s are almost dead nuts with published, and it will work with pretty much any tweeter since it will play up to 4k pretty easily.

<{POST_SNAPBACK}>

those do look very nice on paper it is between those and dynaudio 7" for my next mids

[///M5 2,833]

*most I've ever seen Aaron post in the hop since joining in Sept*

I am not usually an iHop'er because I was more worried about the other sections keeping traffic but at this point any traffic is good, just changes my most posts %'age hehe

Its good. I like the hop when we banter around, pretty much my only relaxation as in my job I have no colleagues, don't work with anybody, have no peers, and travel a chit ton. Doesn't leave a lot of time for idle work chat which you surprisingly need somehow.

I am slacking on some region ids on a target here,

....................................................

den den den dadda den den dadda den den den

bahhh bu ba bahhhh bu bahh bahhhh bu bu bah bu bahh bahh

Studio 500

Might look nice next to a 650.6

[mrray13 30]

i've got to get around...

might be changing jobs, getting back into the welding/fabrication field. i have an interview/weld test if i want to go today....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

My bro-in-law welds stainless for a living, which makes me really want to open up an outdoor kitchen consulting/installation company.

i've welded on just about every metal you can think of, with just about every kind of weld you can name..lol...SS is awesome to weld on though. it's soft, but it lays sweet....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[mrray13 30]

and with that...

i'm...

*poof*

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[///M5 2,833]

those do look very nice on paper it is between those and dynaudio 7" for my next mids

They aren't uber detailed in the upper midrange which would be my only knock. The MB is awesome and the ease of making them sound good is sweet, but the Excel W18's in my car smoke them in the MR. It is funny to hear the W18 breakup though-sssssssssssssssssssssssssssssssss.

[///M5 2,833]

i've got to get around...

might be changing jobs, getting back into the welding/fabrication field. i have an interview/weld test if i want to go today....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

My bro-in-law welds stainless for a living, which makes me really want to open up an outdoor kitchen consulting/installation company.

i've welded on just about every metal you can think of, with just about every kind of weld you can name..lol...SS is awesome to weld on though. it's soft, but it lays sweet....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Doesn't lay for chit when I try Not much practice though and I only have an Oxy-Ace torch.