Welcome to the IHoP

[ramos 2]

have a good one ramos and Justin

<{POST_SNAPBACK}>

Will try , you do the same my brother

[Worlddre 1]

morning folks

[dru 0]

Wait till you get my age. My idea of sleeping late, is getting up at 7am

<{POST_SNAPBACK}>

I cant wait. Shoudl I get two rolls of raamat or will one be enough? its goin in a small coupe fastback

[CBFryman 2]

But im lacking so much in the 60-100Hz area.

<{POST_SNAPBACK}>

Sounds like a driver issue . What drivers are you using ? How much power ? And how / where are they mounted ?

<{POST_SNAPBACK}>

RE 6.5" mids. Im hopeing these drivers im testing will be a big step up.

IB in my doors. Stock location.

[CBFryman 2]

The guy is asking 1950 for it but im not going to pay that. It is on a galvanized trailer. Im thinking of offering 1200 and going from there if i like it when i look at it. Any thoughts?

<{POST_SNAPBACK}>

Better be in pristine condition to be that old, and asking that kind of money. I have seen chriscraft's go for that kind of money.

<{POST_SNAPBACK}>

My dad's 29' chriscraft he just bought was $3500 in excelent condition. I might get some pictures one of these days.

Where do you think i should start talking to him at. I dont plan on paying any more than $1300 even with a newer motor and decent trailer.

[ramos 2]

The guy is asking 1950 for it but im not going to pay that. It is on a galvanized trailer. Im thinking of offering 1200 and going from there if i like it when i look at it. Any thoughts?

<{POST_SNAPBACK}>

Better be in pristine condition to be that old, and asking that kind of money. I have seen chriscraft's go for that kind of money.

<{POST_SNAPBACK}>

My dad's 29' chriscraft he just bought was $3500 in excelent condition. I might get some pictures one of these days.

Where do you think i should start talking to him at. I dont plan on paying any more than $1300 even with a newer motor and decent trailer.

<{POST_SNAPBACK}>

I would start under a grand. Find a middle point you both agree on. I wouldn't go over 11-1200 depending upon condition.

[ramos 2]

Wait till you get my age. My idea of sleeping late, is getting up at 7am

<{POST_SNAPBACK}>

I cant wait. Shoudl I get two rolls of raamat or will one be enough? its goin in a small coupe fastback

<{POST_SNAPBACK}>

always better to have too much than not enough

[ramos 2]

morning folks

<{POST_SNAPBACK}>

Morning sir

[ramos 2]

But im lacking so much in the 60-100Hz area.

<{POST_SNAPBACK}>

Sounds like a driver issue . What drivers are you using ? How much power ? And how / where are they mounted ?

<{POST_SNAPBACK}>

RE 6.5" mids. Im hopeing these drivers im testing will be a big step up.

IB in my doors. Stock location.

<{POST_SNAPBACK}>

Did you do any door treatments ? Dave edwards had the re's for a while in his doors. He had no problems at all with lack of midbass with them

[Worlddre 1]

so what goes on today for everyone

[ramos 2]

Of course he had like 300w on each of them

[CBFryman 2]

But im lacking so much in the 60-100Hz area.

<{POST_SNAPBACK}>

Sounds like a driver issue . What drivers are you using ? How much power ? And how / where are they mounted ?

<{POST_SNAPBACK}>

RE 6.5" mids. Im hopeing these drivers im testing will be a big step up.

IB in my doors. Stock location.

<{POST_SNAPBACK}>

Did you do any door treatments ? Dave edwards had the re's for a while in his doors. He had no problems at all with lack of midbass with them

<{POST_SNAPBACK}>

1 layre of second skin on the door skin and 2 on the panel with overkill behind the speaker.

of coruse they are trying to keep up with an ava18 wiht midbass...which might be my problem

[CBFryman 2]

Of course he had like 300w on each of them 

<{POST_SNAPBACK}>

i have an IS2080 running the componet with the passive Xover.

[CBFryman 2]

The guy is asking 1950 for it but im not going to pay that. It is on a galvanized trailer. Im thinking of offering 1200 and going from there if i like it when i look at it. Any thoughts?

<{POST_SNAPBACK}>

Better be in pristine condition to be that old, and asking that kind of money. I have seen chriscraft's go for that kind of money.

<{POST_SNAPBACK}>

My dad's 29' chriscraft he just bought was $3500 in excelent condition. I might get some pictures one of these days.

Where do you think i should start talking to him at. I dont plan on paying any more than $1300 even with a newer motor and decent trailer.

<{POST_SNAPBACK}>

I would start under a grand. Find a middle point you both agree on. I wouldn't go over 11-1200 depending upon condition.

<{POST_SNAPBACK}>

let me find you a link. Condition is so-so (judgeing form the pics which can make it look worse or better).

[CBFryman 2]

http://adcache.boattraderonline.com/6/8/5/83322885.htm

[dru 0]

so what goes on today for everyone

<{POST_SNAPBACK}>

work from 12 to 4 then workign on making my car pass inspection

[CBFryman 2]

Formula...only company i can find with that name is formula yachts. odd.

I read wrong. OMC=Original Manufacture?

[Worlddre 1]

so what goes on today for everyone

<{POST_SNAPBACK}>

work from 12 to 4 then workign on making my car pass inspection

<{POST_SNAPBACK}>

[CBFryman 2]

so what goes on today for everyone

<{POST_SNAPBACK}>

work from 12 to 4 then workign on making my car pass inspection

<{POST_SNAPBACK}>

<{POST_SNAPBACK}>

x2

No inspections in FL

[dru 0]

everyone has the same schedule? lol

[Worlddre 1]

i cannot say that i remember ever having a car of mine inspected aside from emissions

[ramos 2]

Formula...only company i can find with that name is formula yachts. odd.

I read wrong. OMC=Original Manufacture?

<{POST_SNAPBACK}>

omc= outboard marine corporation

interior looks a little rough . I wouldn't go more than a grand max .

[CBFryman 2]

Yeah, the more i look at it the more and more i think that. Lawl at the plywood engine cover.

ill start at $800...if he takes it as a lowball ill give him $1000 firm and he can take it or leave it.

All this assumeing it runs well and the hull is in good shape.

[Worlddre 1]

my wiring is on the fedex truck for delivery

[CBFryman 2]

Wiring FTW.