Welcome to the IHoP

[JimJ 11]

oh wow, that was surprising

Aaron asked to be my friend on myspace

i feel special lol

<{POST_SNAPBACK}>

Nerds.

[JimJ 11]

TOP.

[vladd 26]

Ditch the labrynth vent and go with an L if you have the clearance.

<{POST_SNAPBACK}>

i actually figure i'll make the port just a tad longer just in case, maybe 2", that should help with bracing and the .1 dispacement from the woofer.

I WOULD ditch the labrynth, i do hate them, but i have a lot of width to work with and would rather it be wide than deep

[Tirefryr 1,742]

Pulled the cover off of the IROC today.  Started it and backed it out of the garage and pulled it back in.  I really just wanted to hear it.

And so it begins.

VIDS!

[Tirefryr 1,742]

Ditch the labrynth vent and go with an L if you have the clearance.

i actually figure i'll make the port just a tad longer just in case, maybe 2", that should help with bracing and the .1 dispacement from the woofer.

I WOULD ditch the labrynth, i do hate them, but i have a lot of width to work with and would rather it be wide than deep

According to the pic you posted, you have plenty of room for the L without sacrificing depth, assuming the driver will have clearance on the rear. Keep in mind, your vent is going to displace some as well, not just the driver. You will end up with quite a bit less than 2.29 cubes. Making the vent longer will only compound this problem by taking up more space.

[Acidburn 10]

Pulled the cover off of the IROC today.  Started it and backed it out of the garage and pulled it back in.  I really just wanted to hear it.

And so it begins.

vids?

[Acidburn 10]

oh wow, that was surprising

Aaron asked to be my friend on myspace

i feel special lol

Nerds.

hey, dont group me in with that category, mine is plain as hell, i havent done anything to it

Aarons on the other hand.....

[vladd 26]

Ditch the labrynth vent and go with an L if you have the clearance.

<{POST_SNAPBACK}>

i actually figure i'll make the port just a tad longer just in case, maybe 2", that should help with bracing and the .1 dispacement from the woofer.

I WOULD ditch the labrynth, i do hate them, but i have a lot of width to work with and would rather it be wide than deep

<{POST_SNAPBACK}>

According to the pic you posted, you have plenty of room for the L without sacrificing depth, assuming the driver will have clearance on the rear. Keep in mind, your vent is going to displace some as well, not just the driver. You will end up with quite a bit less than 2.29 cubes. Making the vent longer will only compound this problem by taking up more space.

<{POST_SNAPBACK}>

sorry the 2.29 is after port dispacement, but not woofer. maybe i'll throw together an L-shape and see what it turns out like

[vladd 26]

someone on an internet forum with thousands of posts just called another member on an internet forum with thousands of posts a nerd,

[Tirefryr 1,742]

Ditch the labrynth vent and go with an L if you have the clearance.

i actually figure i'll make the port just a tad longer just in case, maybe 2", that should help with bracing and the .1 dispacement from the woofer.

I WOULD ditch the labrynth, i do hate them, but i have a lot of width to work with and would rather it be wide than deep

According to the pic you posted, you have plenty of room for the L without sacrificing depth, assuming the driver will have clearance on the rear. Keep in mind, your vent is going to displace some as well, not just the driver. You will end up with quite a bit less than 2.29 cubes. Making the vent longer will only compound this problem by taking up more space.

sorry the 2.29 is after port dispacement, but not woofer. maybe i'll throw together an L-shape and see what it turns out like

I got ya! You should be fine then. Frequency chance will be .8Hz at most and undetectable to the ear.

[Tirefryr 1,742]

Good Night everyone!

[Eldorado 0]

gnight

[Eldorado 0]

That auction for the shoes is cool, most of them would fit my feet

[Eldorado 0]

The new furnace REEKS of burnt rubber.

Giving everyone a headache

[///M5 2,833]

Pulled the cover off of the IROC today.  Started it and backed it out of the garage and pulled it back in.  I really just wanted to hear it.

And so it begins.

When I used to store my other car, I found that a cover removal, half hour drive and a car wash really put me in the right mood.

[///M5 2,833]

Ditch the labrynth vent and go with an L if you have the clearance.

i actually figure i'll make the port just a tad longer just in case, maybe 2", that should help with bracing and the .1 dispacement from the woofer.

I WOULD ditch the labrynth, i do hate them, but i have a lot of width to work with and would rather it be wide than deep

According to the pic you posted, you have plenty of room for the L without sacrificing depth, assuming the driver will have clearance on the rear. Keep in mind, your vent is going to displace some as well, not just the driver. You will end up with quite a bit less than 2.29 cubes. Making the vent longer will only compound this problem by taking up more space.

sorry the 2.29 is after port dispacement, but not woofer. maybe i'll throw together an L-shape and see what it turns out like

I got ya! You should be fine then. Frequency chance will be .8Hz at most and undetectable to the ear.

Jim can hear it with his platinum ears.

[JimJ 11]

word up

[JimJ 11]

I think I'm at the point where I'm just saying "fudge it, I'll wing it for tomorrow"...

[JimJ 11]

Matt, if I don't go to Lexington this weekend, we definitely need to play with the Ava and get chitfaced.

[JimJ 11]

Preferably in that order.

[vladd 26]

I'm tempted to fill up the strat and make a trip to bruce's so i can make a worthy box for it.

[jntar 15]

I finally finished the SQ score card for the shows I will be running. Let me know what you guys think...

[Eldorado 0]

justin, still messed up. Denim didnt fix the forum yet

[jntar 15]

justin, still messed up. Denim didnt fix the forum yet

<{POST_SNAPBACK}>

Whats messed up?

[vladd 26]

welllll now my plans have changed, i was going to be running two 12" avas, but then it changed to one, now it is going to be two again, so aha

mmmm 1/2 ohm on the 1200d, i'm going to have sooo many voltage problems.

anyway, now i have to go back and design the box for two 12ers and my width can only be 37" total