Welcome to the IHoP

[dem beats 1,223]

I got to use an anthem product for a few months. It was nice. It was a lot of cash but didn't have the options I wanted.

[nem 2,019]

I can agree with Duran, after 18 years of indoctrination into the Mormon cult, and then realizing this they tend to be quite rebellious. I have fist hand experience with that.

They call it the stranger when you make your anus go numb by pushing a fist in there too much.

That is what I read on the internets I mean.

[nem 2,019]

I got to use an anthem product for a few months. It was nice. It was a lot of cash but didn't have the options I wanted.

Overall how did you like the power it put out?

I was told thir new stuff is geared more toward hdmi.

[Penguin4x4 1,761]

I can agree with Duran, after 18 years of indoctrination into the Mormon cult, and then realizing this they tend to be quite rebellious. I have fist hand experience with that.

They call it the stranger when you make your anus go numb by pushing a fist in there too much.

That is what I read on the internets I mean.

Actually the stranger is where you sit on your hand until your entire arm goes to sleep then you tug one out with said arm

[Tirefryr 1,742]

Pressure sensors for the VNT controller are here. Only thing missing is the microcontroller.

I will need to DIY a W-terminal on the alternator for RPM output, install the boost gauge to calibrate the pressure sensors and the whole thing will work like a data logger. RPM, intake pressure, throttle position on the first version.

LEt me know how this works.

[Julian 641]

So a few days ago I decided to talk to a Chinese wire manufacture. We spoke and exchanged a few emails and I got it down to where If I were to order 300 (1000ft) meters of 1/0 welding cable I could get it for around 1.50 a foot or roughly 6$ a meter. Pure copper too.

[Jmac 24]

So a few days ago I decided to talk to a Chinese wire manufacture. We spoke and exchanged a few emails and I got it down to where If I were to order 300 (1000ft) meters of 1/0 welding cable I could get it for around 1.50 a foot or roughly 6$ a meter. Pure copper too.

Nice

$1800 on wire, though

Does that include shipping ?

[nem 2,019]

For Pen,

Starting the end of February to no later than early March we'll start to see the very first production of Panasonic's 2012 VIERA Smart TVs.

Panasonic's 2012 pdp models are TC-P55VT50, TC-P65VT50, TC-P65GT50, TC-P60GT50, TC-P55GT50, TC-P50GT50, TC-P65ST50, TC-P60ST50, TC-P55ST50, TC-P50ST50, TC-P60UT50, TC-P55UT50, TC-P50UT50, TC-P42UT50.

http://www.tc-p65vt50.com/

[Julian 641]

So a few days ago I decided to talk to a Chinese wire manufacture. We spoke and exchanged a few emails and I got it down to where If I were to order 300 (1000ft) meters of 1/0 welding cable I could get it for around 1.50 a foot or roughly 6$ a meter. Pure copper too.

Nice

$1800 on wire, though

Does that include shipping ?

Not sure, have yet to speak about it.. but It would be on a roll of course..

53 cm^2 1/0.. Get 100 people to put down 180 dollars, like a group buy..

I asked for a sample and they said they'd send me a foot sample

[Godsmack 361]

I like where ur headin with this Julian.

J

[Julian 641]

I like where ur headin with this Julian.

J

I though you guys would... lol awaiting some more emails.

[Jmac 24]

... so bored ... doesn't look like the hard drives came in today for the server I'm building ... ordered 4 x 3 TB @ $90/each

[Julian 641]

... so bored ... doesn't look like the hard drives came in today for the server I'm building ... ordered 4 x 3 TB @ $90/each

Man HDD's are so cheap these days.

[dem beats 1,223]

I got to use an anthem product for a few months. It was nice. It was a lot of cash but didn't have the options I wanted.

Overall how did you like the power it put out?

I was told thir new stuff is geared more toward hdmi.

Lol. That's a funny question as I had it on my ML's and they have an internal amp. The voltage output on the RCA is a bit higher than normal and that was nice. The Mic and auto set up is extremely nice. I don't have much use though for that.

It was a great unit if you want a mid range receiver with tougher than average speakers to drive.

[ssh 924]

So a few days ago I decided to talk to a Chinese wire manufacture. We spoke and exchanged a few emails and I got it down to where If I were to order 300 (1000ft) meters of 1/0 welding cable I could get it for around 1.50 a foot or roughly 6$ a meter. Pure copper too.

Nice

$1800 on wire, though

Does that include shipping ?

Not sure, have yet to speak about it.. but It would be on a roll of course..

53 cm^2 1/0.. Get 100 people to put down 180 dollars, like a group buy..

I asked for a sample and they said they'd send me a foot sample

Good luck finding a hundred people, keeping track of everyone, packaging and shipping out a hundred boxes.

[Jmac 24]

So a few days ago I decided to talk to a Chinese wire manufacture. We spoke and exchanged a few emails and I got it down to where If I were to order 300 (1000ft) meters of 1/0 welding cable I could get it for around 1.50 a foot or roughly 6$ a meter. Pure copper too.

Nice

$1800 on wire, though

Does that include shipping ?

Not sure, have yet to speak about it.. but It would be on a roll of course..

53 cm^2 1/0.. Get 100 people to put down 180 dollars, like a group buy..

I asked for a sample and they said they'd send me a foot sample

Good luck finding a hundred people, keeping track of everyone, packaging and shipping out a hundred boxes.

I'm surprised no one pointed out the math of 100 x 180 = $18,000 not $1,800 ... Unless, of course, he plans on making a $162 profit (minus shipping) off each of those 100 people, of course ...

[Julian 641]

math > me

[Frostedflakejake 148]

Unless, of course, he plans on making a $162 profit

Hey man, no service is free

[Penguin4x4 1,761]

http://www.ebay.com/itm/Vibco-Vibrating-Motor-SCR-200-4000-115V-2-6A-1-Phase-Concrete-Shaker-Vibrator-/330672140716?pt=LH_DefaultDomain_0&hash=item4cfd9871ac

oh man that's a helluva price

[nem 2,019]

I got to use an anthem product for a few months. It was nice. It was a lot of cash but didn't have the options I wanted.

Overall how did you like the power it put out?

I was told thir new stuff is geared more toward hdmi.

Lol. That's a funny question as I had it on my ML's and they have an internal amp. The voltage output on the RCA is a bit higher than normal and that was nice. The Mic and auto set up is extremely nice. I don't have much use though for that.

It was a great unit if you want a mid range receiver with tougher than average speakers to drive.

I am going to have to check them out in person at some point.

[topgun 262]

http://www.ebay.com/itm/Vibco-Vibrating-Motor-SCR-200-4000-115V-2-6A-1-Phase-Concrete-Shaker-Vibrator-/330672140716?pt=LH_DefaultDomain_0&hash=item4cfd9871ac

oh man that's a helluva price

I've used them before.

[Penguin4x4 1,761]

vibrating tables ftw

[Godsmack 361]

I love it when I buy the wrong damn bolts.

J

[ex650 2]

i almost bowled a perfect game tonight...but i bowled a 299 for the thrid time

[ssh 924]

Anyone looking for a C30? Tucson.