Welcome to the IHoP

[Penguin4x4 1,761]

Making good on his bet with Denver mayor Michael Hancock, Pittsburgh mayor Luke Ravenstahl Tebows the Steel City’s skyline while wearing a No. 15 Denver Broncos jersey.

[Penguin4x4 1,761]

I know Aaron loves that photo even more than I do

[nem 2,019]

That is great Pen. I will copy that and send it to work to flash on the big screens to see what people say.

[Aaron Clinton 2,372]

Fricking crowded at the gym and plenty of douchenozzles..

All the broly's and resolutioners in the way.

Resolutioners will be gone in a week or two; hang tough

Some will hang until Valentines day.

[Aaron Clinton 2,372]

I know Aaron loves that photo even more than I do

[Penguin4x4 1,761]

I would have preferred another Steelers-Ravens brawl for the AFC championship, but such is life

[Penguin4x4 1,761]

To add insult to injury

http://teamcoco.com/video/22727/conan-peanut-players-present-tim-tebow-s-miraculous-pass

[Tirefryr 1,742]

This was over $300:

Christmas 2011

Caviar on a Mini-Crepe & Crème fraiche

Pumpkin Soup with Crème Fraiche & Balsamic Reduction

Venetian Mushroom Bruschetta

Norwegian Meatballs with Fingerling Loaded Baked Potatoes

Lefse

Salmon Carpaccio with Lemon Twist & Caper

Lamb Lollipops with Caper, Walnut, Anchovy Roasted Brussel Sprouts

Grapefruit Slices with a dash of Rasberry Coulis

Mushroom Risotto with Sherry Cream & Asparagus Tips

Moules Frites

Salad Greens with Balsamic Vinaigrette, Lardon, and Seared Fois Gras & a Baguette Slice

Tuna Tartare

Yaki Niku Short Rib with Sesame Soy Sauce & Asian Slaw

Macerated Berries

Grilled Oysters Rockefeller & Caprese Salad Skewers

Lobster Ravioli in Lobster Cream Sauce

Lemon Sorbet

Scallop & Microgreen Salad with Champagne Orange Beurre Blanc

Blue cheese crusted Buffalo Tenderloin with Potato & Celery Root Gratin

Snacks

Charcuterie Plate

Assorted Cookies

Dessert

Salted Carmel Pie

We ate from 2:00 to 7pm. Not including the caviar and Dom Perignon which we had around 1

I had turkey and ham all day.

[Tirefryr 1,742]

Seriously? LSU got one first place vote in the AP poll and OSU got four. How is it 'Bama was not unanimous?

[Penguin4x4 1,761]

its the BCS; it doesn't make sense to begin with!

[Tirefryr 1,742]

AP is Associated Press. They are not BCS, even though the BCS uses them in their ratings system.

[///M5 2,833]

I have a better Tebow pose, but it'll violate the TOS

[Tirefryr 1,742]

Don't hate.

[dem beats 1,223]

I have a better Teabag pose, but it'll violate the TOS

did you give someone Arabian goggles?

[ssh 924]

I have a better Teabag pose, but it'll violate the TOS

did you give someone Arabian goggles?

I'm glad that picture violates the TOS.

[dem beats 1,223]

You know the nights there are hotter than the days?

[dem beats 1,223]

Jasmine was the hottest princess TOP.

[dem beats 1,223]

When I was GI Joe he always rescued Jasmine and rode off in the Tonka big rig together.

She buttered my prepubescent bread.

[lithium 358]

fuck, just when i thought i had my car fixed up.

i had a misfire on cylinder 3 and the camshaft position sensor a few weeks ago. (there was also a 3rd code, possible random cylinder misfire or a repeat of cyl. 3 misfire)

so i did new plugs and replaced the sensor.

if you remember, that's when i found this little gem

last week i replaced the valve gaskets on my own, not bad for a physics nerd haha

still have the misfire after replacing the gaskets so i got the codes read again.

p0300 random cylinder misfire and p0340 camshaft position sensor

ordered new coil boot (spark plug boots), figured i'd start by ruling out coil boots first.

any advice guys?

would purchasing an obd II scanner be any help? i wouldn't mind gambling 50 bucks on something like this obdlink sx- scan tool, if it could save me some money (avoid a mechanic).

car - oldsmobile intrigue

edit: i checked the camshaft sensor connections, everything looked good. ill pick up another sensor in a day or two, depending if they have to order it in

[Godsmack 361]

I have discovered one really good thing about Korea.............Cheap electronics.

J

[///M5 2,833]

fuck, just when i thought i had my car fixed up.

i had a misfire on cylinder 3 and the camshaft position sensor a few weeks ago. (there was also a 3rd code, possible random cylinder misfire or a repeat of cyl. 3 misfire)

so i did new plugs and replaced the sensor.

if you remember, that's when i found this little gem

last week i replaced the valve gaskets on my own, not bad for a physics nerd haha

still have the misfire after replacing the gaskets so i got the codes read again.

p0300 random cylinder misfire and p0340 camshaft position sensor

ordered new coil boot (spark plug boots), figured i'd start by ruling out coil boots first.

any advice guys?

would purchasing an obd II scanner be any help? i wouldn't mind gambling 50 bucks on something like this obdlink sx- scan tool, if it could save me some money (avoid a mechanic).

car - oldsmobile intrigue

edit: i checked the camshaft sensor connections, everything looked good. ill pick up another sensor in a day or two, depending if they have to order it in

I'm a Physicist as well, nerd.

Do you have an O'reilly Auto Parts or a Checker nearby? Both loan you an OBD scanner for free just by leaving your license. I'm sure other auto chains do as well.

My guess is that if you camshaft sensor is off then your car will try to change your timing appropriately (or mis-appropriately in this case)...although considering its a GM it may not be that smart.

[///M5 2,833]

Oh, and Please tell me you dipped that in oil.

[///M5 2,833]

I have discovered one really good thing about Korea.............Cheap electronics.

J

Huh? Not compared to the rest of Asia.

[Aaron Clinton 2,372]

I would have preferred another Steelers-Ravens brawl for the AFC championship, but such is life

Oh yeah, it would have been priceless to watch the Steelers lose in Baltimore for the Ravens to go to the Super Bowl. This entire town would be floating for 2 weeks if that happened.

[lithium 358]

fuck, just when i thought i had my car fixed up.

i had a misfire on cylinder 3 and the camshaft position sensor a few weeks ago. (there was also a 3rd code, possible random cylinder misfire or a repeat of cyl. 3 misfire)

so i did new plugs and replaced the sensor.

if you remember, that's when i found this little gem

last week i replaced the valve gaskets on my own, not bad for a physics nerd haha

still have the misfire after replacing the gaskets so i got the codes read again.

p0300 random cylinder misfire and p0340 camshaft position sensor

ordered new coil boot (spark plug boots), figured i'd start by ruling out coil boots first.

any advice guys?

would purchasing an obd II scanner be any help? i wouldn't mind gambling 50 bucks on something like this obdlink sx- scan tool, if it could save me some money (avoid a mechanic).

car - oldsmobile intrigue

edit: i checked the camshaft sensor connections, everything looked good. ill pick up another sensor in a day or two, depending if they have to order it in

I'm a Physicist as well, nerd.

Do you have an O'reilly Auto Parts or a Checker nearby? Both loan you an OBD scanner for free just by leaving your license. I'm sure other auto chains do as well.

My guess is that if you camshaft sensor is off then your car will try to change your timing appropriately (or mis-appropriately in this case)...although considering its a GM it may not be that smart.

haha, nothing wrong with nerds

all we have around here are federated auto parts, napa, advance auto, and auto zone. i'll check with them

going to order in a new senor today.