Welcome to the IHoP

[///M5 2,833]

Waves crashing about 70 ft from my window. Unobstructed view and doors wide open

[Godsmack 361]

Sounds great Sean.

J

[Duran 387]

The board traces do not look strong enough. For instance, some Soundstreams had big problems with those, easily fixed though. The mosfets are "stressed" for the kind of power they should output.

All in all, I would say they don't look as reliable as a Korean one.

I've personally played with a SounDigital 16Kw in a team mates Durango, daily driven at 4 ohms nominal(which we clamped at 10,600 watts with rise to 6.6 ohms), for competitions he drops it to 1 ohm nominal and needless to say needs recones for his pair of 18's after lol. All the SounDigital's have a lifetime warranty too.

That's why I said they don't look as reliable. I have yet to get my hands on one so my comments are based on detailed gut pics

It hasn't had a single problem, I was doubtful at first. "Umm, you're gonna do 16Kw from dual 1/0 inputs?" I was completely blown away

[Duran 387]

Well, crap, my main SPL competitor just bought a DD 99Z12...

Guess l have my work cut out for this season.

For that fricking money I could buy a car

Crush him with teh BTL, it can me done

Moar port, deadening, couple more interior panels removed...152 is my target this year.

Oh port

[Duran 387]

I feel like I just woke up from a coma, I never get hangovers but that bottle of crown and my stomach didn't agree with eachother

[Kanaworm$ 292]

How's the head? Is that little bugger in your head still swingin' the sledge hammer?

[Duran 387]

How's the head? Is that little bugger in your head still swingin' the sledge hammer?

Me head was fine, I've never gotten a hangover but my stomach was upset and I was running a fever

[Duran 387]

Fucking spam bots are getting more clever.

10 point warning, just because they pissed me off

We are getting close to 75 bogus accounts a day that are not validating.

There were 105 trying to validate on CLZZ earlier today

[Julian 641]

I hate MDF dust... so much...

[Kanaworm$ 292]

How's the head? Is that little bugger in your head still swingin' the sledge hammer?

Me head was fine, I've never gotten a hangover but my stomach was upset and I was running a fever

Bad ice with the Crown?

[Julian 641]

How's the head? Is that little bugger in your head still swingin' the sledge hammer?

Me head was fine, I've never gotten a hangover but my stomach was upset and I was running a fever

Bad ice with the Crown?

friend had that happen... moldy ice.. threw away the moldy parts then used the non ended up getting hella sick.

[Julian 641]

Lolz

[Adrian_D 520]

Well, crap, my main SPL competitor just bought a DD 99Z12...

Guess l have my work cut out for this season.

For that fricking money I could buy a car

Crush him with teh BTL, it can me done

Lol you should recone the BTL to look like a funky pup

Too bad I didn't get a dustcap when they were available

[Julian 641]

Well, crap, my main SPL competitor just bought a DD 99Z12...

Guess l have my work cut out for this season.

For that fricking money I could buy a car

Crush him with teh BTL, it can me done

Lol you should recone the BTL to look like a funky pup

Too bad I didn't get a dustcap when they were available

Mach5 stopped selling them sadly.

[Adrian_D 520]

I hate MDF dust... so much...

Respirator and vacuum cleaner, your lungs will thank you. I still haven't found a way to get the vac hooked up to the table saw, it makes quite a bit of dust.

I'll get a pic of how much dust collects from 4 12 inch cutouts done with the router, I was amazed when I first saw...

[Adrian_D 520]

Well, crap, my main SPL competitor just bought a DD 99Z12...

Guess l have my work cut out for this season.

For that fricking money I could buy a car

Crush him with teh BTL, it can me done

Moar port, deadening, couple more interior panels removed...152 is my target this year.

Oh port

10 inch port just plopped in and leaky gained 0.8...should get me close to the target

[Adrian_D 520]

Fucking spam bots are getting more clever.

10 point warning, just because they pissed me off

We are getting close to 75 bogus accounts a day that are not validating.

There were 105 trying to validate on CLZZ earlier today

Damnit, and some still pass the tests and get to post.

[Julian 641]

I hate MDF dust... so much...

Respirator and vacuum cleaner, your lungs will thank you. I still haven't found a way to get the vac hooked up to the table saw, it makes quite a bit of dust.

I'll get a pic of how much dust collects from 4 12 inch cutouts done with the router, I was amazed when I first saw...

Yeah, I don't have a respirator.. lol

It's an insane amount.. it fluffs up a lot lol

[Kanaworm$ 292]

How is the port flare buisness doing Adrian?

[Adrian_D 520]

Then a dust mask if you don't have a respirator.

I always have trouble with dust masks because they fog up my glasses

[Duran 387]

How's the head? Is that little bugger in your head still swingin' the sledge hammer?

Me head was fine, I've never gotten a hangover but my stomach was upset and I was running a fever

Bad ice with the Crown?

friend had that happen... moldy ice.. threw away the moldy parts then used the non ended up getting hella sick.

Hey I think that was it, I did use old ice

[Duran 387]

Well, crap, my main SPL competitor just bought a DD 99Z12...

Guess l have my work cut out for this season.

For that fricking money I could buy a car

Crush him with teh BTL, it can me done

Moar port, deadening, couple more interior panels removed...152 is my target this year.

Oh port

10 inch port just plopped in and leaky gained 0.8...should get me close to the target

People don't realize how important the port is, lol

[Duran 387]

Fucking spam bots are getting more clever.

10 point warning, just because they pissed me off

We are getting close to 75 bogus accounts a day that are not validating.

There were 105 trying to validate on CLZZ earlier today

Damnit, and some still pass the tests and get to post.

Most do not, I'm surprised those few that made topics were able to get through

[Adrian_D 520]

Well, crap, my main SPL competitor just bought a DD 99Z12...

Guess l have my work cut out for this season.

For that fricking money I could buy a car

Crush him with teh BTL, it can me done

Moar port, deadening, couple more interior panels removed...152 is my target this year.

Oh port

10 inch port just plopped in and leaky gained 0.8...should get me close to the target

People don't realize how important the port is, lol

And box volume.

I have some ideas now and I need more power to be able to confirm them. Basically it all started when I noticed that for a certain volume / power combo from one point on, more port area doesn't help

[Duran 387]

Well, crap, my main SPL competitor just bought a DD 99Z12...

Guess l have my work cut out for this season.

For that fricking money I could buy a car

Crush him with teh BTL, it can me done

Moar port, deadening, couple more interior panels removed...152 is my target this year.

Oh port

10 inch port just plopped in and leaky gained 0.8...should get me close to the target

People don't realize how important the port is, lol

And box volume.

I have some ideas now and I need more power to be able to confirm them. Basically it all started when I noticed that for a certain volume / power combo from one point on, more port area doesn't help

Would you mind sharing your insight? Privately if need be