Jump to content
mrray13

Welcome to the IHoP

Recommended Posts

hey guys, check out my MT pr0n:

mtpr0n16if.jpg

mtpr0n25qq.jpg

ROFL... That had me laughing for a good 30 seconds...

Nice work

:fing34:

:hyper:

:rockwoot:

:woot:

Share this post


Link to post
Share on other sites
So... i spent a couple of hours with my truck today... With regards to audio - it's been nothing more then a testbed since I bought it. Nine or ten different boxes, maybe more. A bunch of amps, yadda yadda. So i'd left all my wiring out for easy swaps.

Well, I finally ran the 8004 to it's final hidden location and hid everything but the Distro block.

Then I made a big ugly new box and stuck an amp to it. LoL

Pics tomorrow Tom, after I tune and test.

Steve - If You are still debating about porting the Uber... DO IT. DO IT. I tore down the 5.0ft box that I'd been using to burp the DD and rebuilt it for the Uber. 4.7ft net, 42 sq in of port tuned to ~34 hz. Tied a 2500D to her in at 1.6 ohm nominal and cruised. Honestly, I am VERY IMPRESSED with the output. For a single 15" with an unknown amount of wattage... in a decent ported, chit she Did impress me.

Thats all on that for now, Tomorrow afternoon I'll test & tune her, get the wattage and impedance figures, and burp one or twice.

Honestly, for a brief moment I could have mistaken her for the (2) SX15" install I had a few months ago.

I wont comment so much on the SQ as yet, I havent spent anytime setting up my HU.

-Nick

YaY for pics!!!! :)

Share this post


Link to post
Share on other sites
Steve - If You are still debating about porting the Uber... DO IT. DO IT. I tore down the 5.0ft box that I'd been using to burp the DD and rebuilt it for the Uber. 4.7ft net, 42 sq in of port tuned to ~34 hz. Tied a 2500D to her in at 1.6 ohm nominal and cruised. Honestly, I am VERY IMPRESSED with the output. For a single 15" with an unknown amount of wattage... in a decent ported, chit she Did impress me.

Thats all on that for now, Tomorrow afternoon I'll test & tune her, get the wattage and impedance figures, and burp one or twice.

Honestly, for a brief moment I could have mistaken her for the (2) SX15" install I had a few months ago.

I wont comment so much on the SQ as yet, I havent spent anytime setting up my HU.

-Nick

I'll have to give it a whirl, then.

Probably go between 5-8 cubes ... 8 sounds really, really large though.

I'm tempted to tune really low, but I'd probably go around 28-32.

Share this post


Link to post
Share on other sites

TOP.

Damnit, forgot to order a cheap pair of earbuds with the iPod.

Share this post


Link to post
Share on other sites
really low= 24 hz

thats WAY too low for in car use IMO. You'll barely have a benefit ported that low. prolly'll yield a wicked dip in response curve as well.

8 cube does seem damned big, but keep it under 1-1.5 kw and she should be alright mechanically. sound? A lil boomy, but huge.

Share this post


Link to post
Share on other sites

so... i got a little carried away this evening... I fully blew the Infinity reference mids (that i was had passed 65-250hz). Damn things were getting 80rms actual (@100hz). *fizzle*rattle*scratch*bup bup bup*

I'm also out a tweet. damned psgr tweet started missing notes about the same time. suxor.

Good thing that I've got that set of Orion P6s in the basement. And a set of JBL mids just got shipped out to me... perfect timing. heh.

Maybe relegate the CDT mids to midbass duty in the Alero.

Bah

Share this post


Link to post
Share on other sites

i got the hang of bbp6, now i need to learn some math

Share this post


Link to post
Share on other sites
it doesnt come with ?!?!?!?

it does come with those white ones, but if u compare those with say $20 aftermarket ones, u'd see those are the worse headphones on earth. people with ipods dont realize that though, cuz most of em arent audiophiles.

Share this post


Link to post
Share on other sites
TOP.

Damnit, forgot to order a cheap pair of earbuds with the iPod.

so where are the pix of edward emohands?

Share this post


Link to post
Share on other sites
really low= 24 hz

thats WAY too low for in car use IMO. You'll barely have a benefit ported that low. prolly'll yield a wicked dip in response curve as well.

Bah, nice flat curve, without the sharp rolloff of sealed. Then again, cabin gain may equalize the sealed. Hmm. Interesting.

Share this post


Link to post
Share on other sites
Anyone have a printer or scanner they are not using or is broken they want to get rid of for next to nothing?

Share this post


Link to post
Share on other sites
it doesnt come with ?!?!?!?

it does come with those white ones, but if u compare those with say $20 aftermarket ones, u'd see those are the worse headphones on earth. people with ipods dont realize that though, cuz most of em arent audiophiles.

x2 - they're horrible. My order hasn't shipped yet, so I'll have to try and get some included.

Share this post


Link to post
Share on other sites
8 cube does seem damned big, but keep it under 1-1.5 kw and she should be alright mechanically. sound? A lil boomy, but huge.

6.5 cubes @ 29hz sounds like a good number tonight :P

I haven't spent a lot of time with the uberwoofer. Just got back from the mall, which is a 10 minute drive ... and I'm surprised at just how loud it really is. Ears ringing and headache :Doh:

Share this post


Link to post
Share on other sites
so where are the pix of edward emohands?

Emo Edward hasn't walked by in the past couple days, unfortunately.

:nopity:

Share this post


Link to post
Share on other sites

Wow I catch up and everyone leaves. :P

Share this post


Link to post
Share on other sites
Anyone have a printer or scanner they are not using or is broken they want to get rid of for next to nothing?

Sorry man, the onle scanner I have is a lief 45, which was a 42 bit color scanner that is tru 4200 DPI, from way back when everything was 16 bit 1200DPI. Cost.......wait for it..........$20k :lol2: ......worth today........$1500. Still works GRRRRREAT!!!!!

I also have a Fugi Pictography 2000, 1st true laser writer for images, no negatives, uses distilled water so it is environmentally friendly :D....Cost me $4 for 8x11 photo print. $35k for printer and rip (raster image processor)....Now only worth $1400.

Share this post


Link to post
Share on other sites

ryan..i've got one...pm me or what ever, mustek brand..

supa...i'm not the one letting internet ppl get under my skin with the word emo...so who's lame?

but, we'll let it go, just because this isn't ca.com......with the occasional outburst of eDmo...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee :slayer:

Share this post


Link to post
Share on other sites
so where are the pix of edward emohands?

Emo Edward hasn't walked by in the past couple days, unfortunately.

:nopity:

:(

:stfu:

Share this post


Link to post
Share on other sites
supa...i'm not the one letting internet ppl get under my skin with the word emo...so who's lame?

but, we'll let it go, just because this isn't ca.com......with the occasional outburst of eDmo...

x2 ive never seen elias so pissy. i guess i'll lay off then, party poopers.

Share this post


Link to post
Share on other sites
supa...i'm not the one letting internet ppl get under my skin with the word emo...so who's lame?

but, we'll let it go, just because this isn't ca.com......with the occasional outburst of eDmo...

x2 ive never seen elias so pissy. i guess i'll lay off then, party poopers.

not all of us can handle our nicknames...

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×