Jump to content
mrray13

Welcome to the IHoP

Recommended Posts

CA.com licks balls.

No one should be sad that the "server is busy."

The server isn't busy.  It's one of two things, and it's happened before ...

1) The admin is doing stuff to the board and thinks that it is better for business if he puts up a "Server is too busy" message instead of "Retard at work" message.

2) The admin has created a bunch of usernames and signed all of them on to the board, just to make it look like the forum actually gets some sort of traffic.  When, in all sense, it only pisses people off.

He should change it to "the goob at work"

Share this post


Link to post
Share on other sites

wavy lays with ranch dip aint to shabby

Share this post


Link to post
Share on other sites

my friend just called me about finding an amp for his 3 cm3's hes gonna put in a sealed box. His "professional installers" are trying to sell him a jl 500/1 or jl 250/1! :ohsnap:

Share this post


Link to post
Share on other sites

CM3? what kind is that and what is the coil config?

Share this post


Link to post
Share on other sites

i just talked to him again. It looks like hes gonna get a jl 1000/1. They are giving it to him for $500, which is pretty good. Only other amps I could think of that would be nice and do 1kw + are the memphis mcd1000, mtx 1501d and the rf 1501bd

Share this post


Link to post
Share on other sites

The JL only puts out 1k@ 1-4ohm correct?

And the subs are 500rms=1500rms

so 500rms under running sealed....for $500 he could look into something that does 1.5k instead of getting the JL. JL is good stuff but overpriced IMO, I have had them.

Share this post


Link to post
Share on other sites
The JL only puts out 1k@ 1-4ohm correct?

And the subs are 500rms=1500rms

so 500rms under running sealed....for $500 he could look into something that does 1.5k instead of getting the JL. JL is good stuff but overpriced IMO, I have had them.

it's gonna be somewhat tough to find a quality amp that will do 1500 rms @ 2.66 ohm's for under 500. I guess the pg tantrum would be another option though since that one does around 1400 @ 4 ohms and its regulated.

1kw is actually a decent amount of power for them imo. It wont strain his electrical system as much and it should still get pretty loud. I'll try and talk him outta jl though. I'm not a fan of it either.

Share this post


Link to post
Share on other sites
The JL only puts out 1k@ 1-4ohm correct?

And the subs are 500rms=1500rms

so 500rms under running sealed....for $500 he could look into something that does 1.5k instead of getting the JL. JL is good stuff but overpriced IMO, I have had them.

it's gonna be somewhat tough to find a quality amp that will do 1500 rms @ 2.66 ohm's for under 500. I guess the pg tantrum would be another option though since that one does around 1400 @ 4 ohms and its regulated.

1kw is actually a decent amount of power for them imo. It wont strain his electrical system as much and it should still get pretty loud. I'll try and talk him outta jl though. I'm not a fan of it either.

The memphis 16-mcd1500 is rated at 1500@2ohm with 13.8v, at 14.4v I would bet it is close. Orion 2500D will put out that power, finding one for the price is another story.

This might out out [email protected]

http://www.thezeb.com/p-Power-Acoustik-A24...fier-103248.htm

1200@1-4ohm

http://www.thezeb.com/p-Phoenix-Gold-Xenon...00.1-108754.htm

Share this post


Link to post
Share on other sites

Dinner time!!!

Share this post


Link to post
Share on other sites
The JL only puts out 1k@ 1-4ohm correct?

And the subs are 500rms=1500rms

so 500rms under running sealed....for $500 he could look into something that does 1.5k instead of getting the JL. JL is good stuff but overpriced IMO, I have had them.

it's gonna be somewhat tough to find a quality amp that will do 1500 rms @ 2.66 ohm's for under 500. I guess the pg tantrum would be another option though since that one does around 1400 @ 4 ohms and its regulated.

1kw is actually a decent amount of power for them imo. It wont strain his electrical system as much and it should still get pretty loud. I'll try and talk him outta jl though. I'm not a fan of it either.

The memphis 16-mcd1500 is rated at 1500@2ohm with 13.8v, at 14.4v I would bet it is close. Orion 2500D will put out that power, finding one for the price is another story.

This might out out [email protected]

http://www.thezeb.com/p-Power-Acoustik-A24...fier-103248.htm

1200@1-4ohm

http://www.thezeb.com/p-Phoenix-Gold-Xenon...00.1-108754.htm

i actually just recommended that memphis to him. lol. The xenon is 480? The jl 1000/1 is the same price as that once you factor in shipping and I really dont see a couple hundred watts making any difference.

Share this post


Link to post
Share on other sites
CA.com licks balls.

No one should be sad that the "server is busy."

The server isn't busy.  It's one of two things, and it's happened before ...

1) The admin is doing stuff to the board and thinks that it is better for business if he puts up a "Server is too busy" message instead of "Retard at work" message.

2) The admin has created a bunch of usernames and signed all of them on to the board, just to make it look like the forum actually gets some sort of traffic.  When, in all sense, it only pisses people off.

grrr... suckiness, i need my daily dose of stupidity

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×