Welcome to the IHoP

[Tirefryr 1,742]

Kent, do some online searching. I just buy mine from PE because they get them to me in a day and always have what I need. Plus they have quite a selection from just cheap stuff to audiophile grade components. You can pick some stuff up from your local Shack though. Madisound, Zalytron, Solen, Apex Jr., MCM, there are a ton of options. Don't forget Ebay as well.

[mrray13 30]

Kent, do some online searching.  I just buy mine from PE because they get them to me in a day and always have what I need.  Plus they have quite a selection from just cheap stuff to audiophile grade components.  You can pick some stuff up from your local Shack though.  Madisound, Zalytron, Solen, Apex Jr., MCM, there are a ton of options.  Don't forget Ebay as well.

i get a discount at shack...

can i just go in and ask for what i need? or can someone give me a llist..lol

i'm lazy

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Acidburn 10]

i'm here..sup??

ryan, tom...at least 12db...i want a decent filter..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

ok, according to my equations, you need a 234.375 microFarad capacitor and a 7.503 milliHenry coil for a 12 dB/octave x-over at 120 Hz on a 4 ohm load

[jntar 15]

Kent you through with the poker?

[mrray13 30]

ok....now links to where i get these?? lol..

i've been to pe..but i'm still lost..

someone take n=my hand and guide me thru this..lmao

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

Kent, I suggest clicking on that link I provided before you move any further. It will go into great detail on everything you need to know when doing this.

[mrray13 30]

Kent you through with the poker?

just about..lol..

it's boring tonite

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

OMG!!! I just got photos of the new D2s!!!!!!!!!!!!!!

[mrray13 30]

Kent, I suggest clicking on that link I provided before you move any further.  It will go into great detail on everything you need to know when doing this.

at the 12volt.com? i've got it saved in my favorites..lol..

but where i'm lost is what do i look at to build this...

i know i need the coil, and evidently a mF resistor..but what else..a board? ok, simple enough...is cheap ok? any hints? this is just to help out a funkypup on a cheap bookshelf..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Acidburn 10]

OMG!!!  I just got photos of the new D2s!!!!!!!!!!!!!!

bastadge!

[jntar 15]

OMG!!!  I just got photos of the new D2s!!!!!!!!!!!!!!

<{POST_SNAPBACK}>

WHERE???

[mrray13 30]

OMG!!!  I just got photos of the new D2s!!!!!!!!!!!!!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Acidburn 10]

Kent, I suggest clicking on that link I provided before you move any further.  It will go into great detail on everything you need to know when doing this.

at the 12volt.com? i've got it saved in my favorites..lol..

but where i'm lost is what do i look at to build this...

i know i need the coil, and evidently a mF resistor..but what else..a board? ok, simple enough...is cheap ok? any hints? this is just to help out a funkypup on a cheap bookshelf..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

thats a mF cap, sorry i had a typo

and i've even seen a piece of cardboard used to hold the components in place

[Tirefryr 1,742]

OMG!!!  I just got photos of the new D2s!!!!!!!!!!!!!!

WHERE???

I'm priviledged!

[mrray13 30]

OMG!!!

[Tirefryr 1,742]

Stay tuned! If you thought the Magnums were good, you're gonna cry when you hear the new ones. And see them. Let's just say INVERTED is the ONLY way to go!

[Acidburn 10]

:dancingsmilie:

[Supa_c 1]

[mrray13 30]

ok..if i do a third order filter..i need on 7.9mH coil, then one 441mF parallel capacitor and then one 2.65mH coil..

this is what i've decided on..18db slope, 4ohm..

so, now it's off to parts express to see what i can find..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Acidburn 10]

ok..if i do a third order filter..i need on 7.9mH coil, then one 441mF parallel capacitor and then one 2.65mH coil..

this is what i've decided on..18db slope, 4ohm..

so, now it's off to parts express to see what i can find..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

good plan Kent

and as always, `

[Tirefryr 1,742]

YOu guys want a pic?

[Acidburn 10]

YES!

[Tirefryr 1,742]

HA HA HA HA

Come on now. You know I can't do that.

[Acidburn 10]

i hate you sooo much Ryan

[mrray13 30]

click this

are these the parts i need to build the above mentioned x-over?

three of the coils will be paralleled to form the 7.9mH.....three to form the 2.65mH and the two caps to make the 441uF

is that correct??

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee