Welcome to the IHoP

[Penguin4x4 1,761]

fresh oil + oil filter in the E55, extremely easy and straightforward....

[patented17 21]

I'd love to try my hand at building some bookshelf speakers, just wanted to get some options on what was out there.

[Penguin4x4 1,761]

Dunno, you think the E55 needed a plug change?

[Adrian_D 520]

Dunno, you think the E55 needed a plug change?

They look mint

[Adrian_D 520]

Progress so far with the mids :

Just threw them on as much on-axis as possible. Drivers side was modified since the picture so that it doesn't interfere with the clutch pedal at all.

So far tonality is excellent. The stage is wide but still a lot more to tune to raise it and improve focus. Spent ~30 minutes listening and tuning

[Adrian_D 520]

I still haven't found a pair of kickpanels local so I can chop them up and start fiberglassing

There is a pair on ebay so I might sau eff it and buy off ebay.

[Penguin4x4 1,761]

OMG SNAKES!!!

[dem beats 1,223]

Could port a little lower I suppose as well. 16hz is what I used.

The easy buttin is supposed to be tuned to ~10hz from that I was reading, did I miss something?

The curves I posted were at 16.

=P

wat fuze wur u uzing?

[Penguin4x4 1,761]

http://www.saynotocankles.com/

I LOL'd

[dem beats 1,223]

Dunno, you think the E55 needed a plug change?

artsey reverse focus on dirty plugs FTL!!11!one!111

[dem beats 1,223]

OMG SNAKES!!!

badger badger mushroooooom!

=)

looking good sorry to hear about the rim. I bet it kills having such a sweet ride and some jack hole does that to ya!

[Penguin4x4 1,761]

artsey reverse focus on dirty plugs FTL!!11!one!111

<--- camera noob that seems to get the strangest results

[dem beats 1,223]

Progress so far with the mids :

Just threw them on as much on-axis as possible. Drivers side was modified since the picture so that it doesn't interfere with the clutch pedal at all.

So far tonality is excellent. The stage is wide but still a lot more to tune to raise it and improve focus. Spent ~30 minutes listening and tuning

should be sweet when it's all done.

[dem beats 1,223]

Im like a cashew in a lollipop, just keep suckin 'till ya get a nut

[///M5 2,833]

http://itemlistings.ebay.com/sdcsrp?siteid=0&fl=120436174740&xm=true&afflpt=229590

maybe?

I'd get a quote from Mercedes and force them to pay you, then I'd buy a complete set of something else with the money.

barring that, does that look like a good deal though?

No. Not sure what it should be, but that seems steep.

[///M5 2,833]

fresh oil + oil filter in the E55, extremely easy and straightforward....

Is that a top mount filter like the BM'ers use? I love those.

[///M5 2,833]

I'd love to try my hand at building some bookshelf speakers, just wanted to get some options on what was out there.

I'd search for plans for something that has already been built and reviewed. Not trivial to design your own.

[///M5 2,833]

Dunno, you think the E55 needed a plug change?

I think you need to learn how to turn the camera either to a higher Fstop so that the depth of field is more or put it on point focus and focus on the target for the picture.

[///M5 2,833]

and yes, change 'em

[///M5 2,833]

I still haven't found a pair of kickpanels local so I can chop them up and start fiberglassing

There is a pair on ebay so I might sau eff it and buy off ebay.

I just bought replacements for the M, both kicks, both sails with drivers, two ashtrays, and a 4 button window switch (pass rear didn't work from up front) for $78 shipped.

[///M5 2,833]

Which means the Excels are now sitting in my basement. Eventually they will be either sunroom or office speakers matched up with the 27T's I bought from Matt.

[///M5 2,833]

The crossovers for those are going to be a bitch

[///M5 2,833]

Could port a little lower I suppose as well. 16hz is what I used.

The easy buttin is supposed to be tuned to ~10hz from that I was reading, did I miss something?

The curves I posted were at 16.

=P

wat fuze wur u uzing?

a short one

[///M5 2,833]

Im like a cashew in a lollipop, just keep suckin 'till ya get a nut

lol

[Penguin4x4 1,761]

and yes, change 'em

I was being facetious