Welcome to the IHoP

[Penguin4x4 1,761]

I don't mind either way, I was just stating a fact; mods here will not put up with dumb shit

[ABXX49 20]

okay maybe a little necessary

But I don't feel spoon feeding is ever necessary.

Of course I feel we may have a different definition of "spoon feeding". So you go first

I agree with you. When I first joined I didn't post ANYTHING for nearly 4 weeks. I just kinda looked around, found out who was who, and tried to model myself after some of the highly respected. I think there should be a required reading thing, and then a test afterwards. If you don't ace the test, you can retake it until you do. That will drill somethings into peoples heads, and hopefully cut down some of the retarded crap floating around.

[Penguin4x4 1,761]

looks like ~170-200 including shipping for a KD-AHD39 and a steering wheel control adapter, not too shabby

course I won't be purchasing until summer, so I have plenty of time to save

[seanbw 1]

I doubt anyone else will be as excited, but maybe I'll toss some of the kitchen renovation pics up too.

If I can get my phone to work I'll toss on some pics of Cali when I drove through the canyons outside malibu.

let's see them counter tops and cabinets! a little cali scenery never hurts either

[seanbw 1]

*scrolls up* Yep, AR-10....

*doh*

.308 FTW

if you want to shoot foreign surplus look at S&B, fiocchi, priv partizan. same price range as wolf/bear and you get legit brass without skimping on velocity and accuracy.

i use breakfree clp for everything gun related but i'm not very oil and solvent savvy so i just stuck with what my ffl/ammo guy recommended.

[seanbw 1]

i have read just about everything i can and i still dont understand clipping

i guess everyone reaches the limit of their cognitive abilities somewhere

[///M5 2,833]

I don't mind either way, I was just stating a fact; mods here will not put up with dumb shit

And if they did the site would go to hell really, really, really fast. Quickest way to get me to not come here would be to let this happen. The average thread has gotten significantly worse in the past year and the only way to correct this is to be sure to let people realize that they can't post threads that way.

[seanbw 1]

i have read just about everything i can and i still dont understand clipping

Considering this you should never, ever answer a thread on this forum.

stop being a dick to everyone on this forum...u said earlier in another thread that this isnt CA.com..well ur acting just like MOST CA.com mods do.and ur making alot of people that r trying to learn feel like complete dumbasses..

No, Sean is not like the ca.com moderators. He actually gives a chit about things, knows what he is talking about, and will help you if you ask an intelligent question rather than post one word replies.

i can tell that he knows alot about car audio..ill give him that but he can come off as a dick to some of the newer members..i have really noticed this the past few days and its getting under my skin...i understand that patience can sometimes grow thin but people WILL ALWAYS post dumb threads but still should not be treated like chit because of it...

why hold people to such a low standard? if new members don't read the terms and conditions or ignore them why shouldn't they be held accountable?

[topgun 262]

*scrolls up* Yep, AR-10....

*doh*

.308 FTW

if you want to shoot foreign surplus look at S&B, fiocchi, priv partizan. same price range as wolf/bear and you get legit brass without skimping on velocity and accuracy.

i use breakfree clp for everything gun related but i'm not very oil and solvent savvy so i just stuck with what my ffl/ammo guy recommended.

There is really not any foreign surplus left...

[///M5 2,833]

and they normally completely ignore them, not even close

Of course my favorite forum, if you did that just once you'd be banned permanently. By far the best search function on that forum ever since all the threads are useful. Search on ca.com once and realize that all you get is shit. There was a time when searching here yielded mostly good results, but letting this mayhem continue will take that away.

[///M5 2,833]

top

[Penguin4x4 1,761]

bottom

[///M5 2,833]

Note, the forum I referred to above is not audio related. Someone just asked so I thought I'd clarify.

[Penguin4x4 1,761]

all hell set to break loose in t minus 1 hour

[Mike. 0]

and they normally completely ignore them, not even close

Of course my favorite forum, if you did that just once you'd be banned permanently. By far the best search function on that forum ever since all the threads are useful. Search on ca.com once and realize that all you get is chit. There was a time when searching here yielded mostly good results, but letting this mayhem continue will take that away.

That's exactly the issue.

I'm still trying to learn a lot but to be quite honest it's hard to find all the answers you need when you search and some BS just comes up, irrelevant to the question at hand, with no solution.

Not saying that stupid, simple threads are justifiable, just that it gets real frustrating.

I know I've learned a lot from this site in the short time I've been here but still got a LONG way to go.

[///M5 2,833]

and they normally completely ignore them, not even close

Of course my favorite forum, if you did that just once you'd be banned permanently. By far the best search function on that forum ever since all the threads are useful. Search on ca.com once and realize that all you get is chit. There was a time when searching here yielded mostly good results, but letting this mayhem continue will take that away.

That's exactly the issue.

I'm still trying to learn a lot but to be quite honest it's hard to find all the answers you need when you search and some BS just comes up, irrelevant to the question at hand, with no solution.

Not saying that stupid, simple threads are justifiable, just that it gets real frustrating.

I know I've learned a lot from this site in the short time I've been here but still got a LONG way to go.

Exactly why things needed to be modded in such a way to insure that threads are useful. Then your searching would be more fruitful. Although, you will find if you make a thread that says I searched for this, and this, and this and couldn't find what I was looking for and here is my question and why I am wondering you will get great answers.

[Penguin4x4 1,761]

scratch that, all hell breaking loose now

wee

[///M5 2,833]

scratch that, all hell breaking loose now

wee

[Acidburn 10]

and they normally completely ignore them, not even close

Of course my favorite forum, if you did that just once you'd be banned permanently. By far the best search function on that forum ever since all the threads are useful. Search on ca.com once and realize that all you get is shit. There was a time when searching here yielded mostly good results, but letting this mayhem continue will take that away.

corner carvers?

[Penguin4x4 1,761]

scratch that, all hell breaking loose now

wee

no pics other than doppler...so far

[bassahaulic 155]

I am here......

[Tirefryr 1,742]

BLAH BLAH BLAH,,,,, fudge GROWING UP, fudge GIRLS. fudge RESPONSIBILITYS IM SO SICK OF STUPID fudgeING chit

Captain Maturity strikes again.

That's great!

[Tirefryr 1,742]

Anyone wanna buy an atom bomb

BIG BROTHER is watching you now!

[Tirefryr 1,742]

i have read just about everything i can and i still dont understand clipping

Considering this you should never, ever answer a thread on this forum.

stop being a dick to everyone on this forum...u said earlier in another thread that this isnt CA.com..well ur acting just like MOST CA.com mods do.and ur making alot of people that r trying to learn feel like complete dumbasses..

It's called tough love. We don't pussy foot around here. If you can't take it, leave.

Those that truly have the passion to learn, understand the prodding and they grow.

[bassahaulic 155]

TOP