Welcome to the IHoP

[KU40 173]

Megan Fox is in the newest Maxim. mmmm. Too bad she has the name "Brian" tattooed on her pelvis.

Dumb bitch can't spell for shit. She called me while at the tattoo parlor and I told her, it's R Y A N. Stupid bitch.

hahahaha. Well she is a young actress. Who knows if she finished school.

[Tirefryr 1,742]

MAn, that Fiber One bar is NOT agreeing with me this morning.

[Adrian_D 520]

I got the 1 point I needed to pass a class.

1 more year of free college

[dem beats 1,223]

if you go to the website for the genesis it beats a porche in a race.. lol

where?

http://www.hyundaigenesis.com/#/performance/

^^^clickey clickey

[dem beats 1,223]

Or that fun doesn't stop where the pavement does...

which is the only way to have fun in a Toyota

I liked the supra I sat in.... I was younger then but it might still be a fun car to drive I don't know..... Most of them have fart can mufflers though, this one was subtle.

[dem beats 1,223]

if you go to the website for the genesis it beats a porche in a race.. lol

where?

maybe it was a 914?

Twas a box

[dem beats 1,223]

I'm really really pissed with my sub install. It's such a damn headache to run the wire to the trunk. The center console have 10+ bolts holding it down. And to take off the seats as I had planned will require another special tool on top of the HUGE torques bit I just got. I want to deaden the floor, and really the firewall but this is retarded. Really really retarded.

I feel ya man. Seems like its always something. I do not have the easy to access hole in the firewall like M5 does and I own the same year truck both EC and both z71. I don't even have a drill bit big enough for the 1/0 so I'm going to have to get a unibit, and I am considering running the Power wire under the truck because its damn dear impossible to get a drill bit in a descent spot on the firewall.

On a good note though, box is on the way and seat lift is on the way! Still need an Icon...

Sean, is your truck LT?

I would go under the truck.... I'm almost thinking about it and I CAN go through the firewall. I think the 1/0 will look sloppy under the carpet.

There is a channel on the GM crap that is made for 1/0. There is not a single lump anywhere in the carpeting from it.

sounds like you're happy with something GM did....

Nah, untill he filled it with the 1/0 it had a huge divet in it

[dem beats 1,223]

^^^^

That thing is a POS.

The hell it is. One hell of a fun commuter car and the inside is deceivingly large for a 3 door hatch. I've taken my fair share of naps curled up in the back seat of my dad's before

I will agree to disagree

A fun comuter car is my 954 CBR. That is a nice car for someone who refuses to buy used, and didn't want to spend a large chunk of cash.

I do however understand the nice warranty that comes with it. I have never seen a 10 Y/O hyundai in good condition, so untill I do I'm just not going to beleive in the product. My geo metro was "deceivingly large" inside too. But I got about 53 miles to the gallon average on road trips. And right around year 8 or 9 the engine just shot a rod through the wall.

Really cheep economy cars like these are not made for any longer use or to do anything that get from point A to point B. I would rather have a bike. In theat price point you can find something with substance or style used with many many many more selling points and it will last longer 9 out of 10 times.

[dem beats 1,223]

I'm really really pissed with my sub install. It's such a damn headache to run the wire to the trunk. The center console have 10+ bolts holding it down. And to take off the seats as I had planned will require another special tool on top of the HUGE torques bit I just got. I want to deaden the floor, and really the firewall but this is retarded. Really really retarded.

I feel ya man. Seems like its always something. I do not have the easy to access hole in the firewall like M5 does and I own the same year truck both EC and both z71. I don't even have a drill bit big enough for the 1/0 so I'm going to have to get a unibit, and I am considering running the Power wire under the truck because its damn dear impossible to get a drill bit in a descent spot on the firewall.

On a good note though, box is on the way and seat lift is on the way! Still need an Icon...

Sean, is your truck LT?

I would go under the truck.... I'm almost thinking about it and I CAN go through the firewall. I think the 1/0 will look sloppy under the carpet.

Have you thought about/tried under the door jam deal? I have a 98 explorer and it surprised the heck out of me that my 1/0 would fit under there and it would still snap down.

Under the plastic bottom part of the door? WOW! I shall look. How did you jump from the front door to the rear?

[dem beats 1,223]

Went to the liquor store and walked out with two six packs and a bottle of Jack.

first legal buy?

[dem beats 1,223]

Now all I have to do is find out what concealed carry gun I'm going to buy. That Ruger LCP looks tempting.

I plan on picking up that panther rifle, and maybe a little 9mmk XD for the wifey, I want to see her handle recoil first though.

[dem beats 1,223]

spam the HOP TOP^

[Chevy350TPI 12]

Well, I'm starting to look for a new job. My contract has a two week window next summer in which I can pack up and move on if I want. Time to start searching now and potentially secure something for the middle of next summer and potentially move down south. Now just to bust my butt to get the PhD done by April.

[dem beats 1,223]

Well, I'm starting to look for a new job. My contract has a two week window next summer in which I can pack up and move on if I want. Time to start searching now and potentially secure something for the middle of next summer and potentially move down south. Now just to bust my butt to get the PhD done by April.

come to MN

bright people are welcome! Audio nuts more some.

We are home of Magnepan and audio research.

And U of M could probably use your still if not some other college.

[///M5 2,833]

I'm really really pissed with my sub install. It's such a damn headache to run the wire to the trunk. The center console have 10+ bolts holding it down. And to take off the seats as I had planned will require another special tool on top of the HUGE torques bit I just got. I want to deaden the floor, and really the firewall but this is retarded. Really really retarded.

I feel ya man. Seems like its always something. I do not have the easy to access hole in the firewall like M5 does and I own the same year truck both EC and both z71. I don't even have a drill bit big enough for the 1/0 so I'm going to have to get a unibit, and I am considering running the Power wire under the truck because its damn dear impossible to get a drill bit in a descent spot on the firewall.

On a good note though, box is on the way and seat lift is on the way! Still need an Icon...

Sean, is your truck LT?

Of course it is an LT, I don't buy stripped out vehicles. Full boat or bust. Crazy if that is the difference that causes the grommet to not be there. Perhaps calling it a grommet is misleading as it is covered in tar goop. Feel in the location for something that is like sticky silly putty and when you find it pull it out. It was just a hole in the dash with nothing running through it.

I'm 99% sure I looked in the same spot as yours. Mine even has an indention and a flap cut in the fire wall foam/rubber where it should be.... I think

my truck is LS but has all the bells and whistles of the LT w/o the leather seats. Unless they put onstar in the 02's I think I have it all

Mine had Onstar, but I obviously don't give a shit about it and wouldn't pay for it. That has to be the stupidest option I have ever heard of.

[///M5 2,833]

if you go to the website for the genesis it beats a porche in a race.. lol

where?

http://www.hyundaigenesis.com/#/performance/

^^^clickey clickey

The boxster should have been a VW and the Corrado a Porsche

[dem beats 1,223]

LOL

Good call Sean. I myself love the corrado. Smallish, but awesome.

[Penguin4x4 1,761]

^^^^

That thing is a POS.

The hell it is. One hell of a fun commuter car and the inside is deceivingly large for a 3 door hatch. I've taken my fair share of naps curled up in the back seat of my dad's before

I have never seen a 10 Y/O hyundai in good condition, so untill I do I'm just not going to beleive in the product.

To be fair they've only been making quality products for the past 5 years or so :drink40:

[Godsmack 361]

I still need to say this.............I MISS MY FUCKING ACURA

[dem beats 1,223]

I feel ya penquin.. I'm slow to think highly of any product, especialy a money pit like a car.

You had an integra right Godsmack? My buddy has a 6 speed manual legend and that can it dang amazing for sure. acura makes nice rides.

[dem beats 1,223]

For Japonease, I love the toyota ISF... err lexus WTFever... and the TL. I wish they made a coupe TLs 6 speed, and RWD

[Penguin4x4 1,761]

Honda making a RWD vehicle, that'll be the day

[Tirefryr 1,742]

Honda making a RWD vehicle, that'll be the day

S2000 ring a bell?

[Penguin4x4 1,761]

I was being sarcasatic

[Penguin4x4 1,761]

sarcastic even