Welcome to the IHoP

[ramos 2]

Or maybe I will just go home and play with my balls

[ramos 2]

Or maybe I will just go home and play with my balls

[ramos 2]

Or maybe I will just go home and play with my balls

[ramos 2]

Or maybe I will just go home and play with my balls

[ramos 2]

Or maybe I will just go home and play with my balls

[ramos 2]

Or maybe I will just go home and play with my balls

[Sex Cells 0]

oh my gawds

[JimJ 11]

kinky...

Just wash up before you touch the Fostex...

[Sex Cells 0]

i think my midbass/tweet budget will be 500... any suggestions? i'm down to buy used too.

[Sex Cells 0]

screw it, i'll just go out and buy an R8 with the bang and olfsen (sp) option

[ramos 2]

kinky...

Just wash up before you touch the Fostex...

Speaking of which , my 67 year old mother thinks your "origami speaker" is "pretty"

[vladd 26]

ok so guy e-mailed me back about the TuLines...

" The overall sound of the TuLines is very good, in all modesty, but because the RS52 dome midrange has a large flange diameter and both woofers are running off the same crossover to the midrange, the integration of the four drivers isn't quite as good as one would want, and it would have been better if this had been designed as a 3-1/2 way instead of a 3-way where the lower woofer would have only been helping out with BSC and the lowest frequencies"

wtf does he mean? one rs180 is putting out a different sound, and needs BSC or that the midrange needs it?

[DevilDriver 28]

What he's saying is that the second RS180 (apparently the one on the bottom) would have been better suited with a lower crossover frequency than the other RS180 (accounting for the "1/2" part) to serve as an acoustic Baffle Step Compensation approach rather than having both drivers accounting for the same bandwidth with no method of BSC, although there may be an electrical network solution in place. I'm not familiar enough with the network to say one way or the other although I'm sure he's bang-on with what he's saying if he designed it.

I assume this is Martin you're speaking with?

[vladd 26]

no this is paul kittinger.... he had someone else do the crossover for him

[DevilDriver 28]

Without looking at the design, I can't really guess as to how significantly a BSC would (or would not) have helped. Most end users don't even know what BSC is and it's quite possible you'll be very satisfied if you build it.

[Adrian_D 520]

i never realised an american can pronounce my name so nicely untill paypal called me

[Adrian_D 520]

since i was in the car when they called me and it was a bit noisy i actually thought someone from the college called me.

[Tirefryr 1,742]

Or maybe I will just go home and play with my balls

Stop by here first.

[Aaron Clinton 2,372]

6k to go.

[Aaron Clinton 2,372]

Past $850 for parts so far, would be close to 875 when done.

[///M5 2,833]

parts for?

[Aaron Clinton 2,372]

parts for?

The super tiny actuator I am working on. Sorry was just sort of thinking / stressing figuratively out loud.

[ramos 2]

* RANT

SCREW pucking VIRGINIA TECH AND THEIR GOD DAMN THURSDAY NIGHT GAMES . TOOK ME 3 HOURS TO DRIVE 15 MILES ON THE DAMN INTERSTATE

*end rant

[///M5 2,833]

screw college football

[ramos 2]

Nothing wrong with college football . Just leave the chit on SATURDAY WHEN PEOPLE AREN"T TRYING TO DRIVE HOME FROM WORK .