Welcome to the IHoP

[Godsmack 361]

how about maybe going after wildlife?

J

[Supa_c 1]

I ran my system for a couple hours last night, at pretty decent volume, and didn't even drop below 11.5V lol

PDX's are efficient bastards.

Were they hot at all ?

Ive been wanting to get some but the passive cooling on them doesnt look like its all that great.

[Supa_c 1]

so i got the pair of rlis in today in .5ft3 sealed each

pretty happy with them and im considering running a single ported instead of the pair hmm

Personally I would think that to be a mistake. IMO sealed with that 8 is the way to go. Plus the box for one is huge.

Single 8 with 500w with a 10" pr for me please.

I just need to fix the surround,crappy glue came undone.

[2kchevy 3]

I see aaron

[Supa_c 1]

[2kchevy 3]

oh and the 1/2 of chromed out 1100 productions as well

[///M5 2,833]

Just bought some plywood to finish the stupid seat in my boat. Perhaps I will get her done tonight so I can post pics

[///M5 2,833]

freehand circular saw cuts for the win, I just realized my fence is in storage

[///M5 2,833]

ha, i just spelled out ftw.

[Adrian_D 520]

i love dad's sheet metal cutter. no real trouble with 1/0 and 2~3 mm metal.

the door panel was a piece of cake.

[Adrian_D 520]

had to trim some metal to fit the mli.

i was in shock when dad told me he could get some rings machined out of aluminum instead of the "classical" mdf

[Adrian_D 520]

any cons to using aluminum rings instead of mdf ?

aside from the screw trouble

[2kchevy 3]

damn you guys type fast, I was looking at ca.com for maybe 30 seconds, come back to see all these posts. hahaha

[Aaron Clinton 2,372]

I see aaron

[Adrian_D 520]

that's not fast

[///M5 2,833]

As long as you use an isolating barrier between the baffle and the mount I'd like an aluminum baffle. The mdf is naturally deader and better at decoupling, but a bunch of modelling clay and that issue goes out the window.

[Aaron Clinton 2,372]

Searching for submersible linear actuators.

[///M5 2,833]

you building a submarine?

[Adrian_D 520]

As long as you use an isolating barrier between the baffle and the mount I'd like an aluminum baffle. The mdf is naturally deader and better at decoupling, but a bunch of modelling clay and that issue goes out the window.

how about using deadener between the ring and sheet metal ?

forgot to mention : i don't know if i can get the thickness i want, so i could be using 2 rings

modelling clay just like the kind kids play with ?

[2kchevy 3]

you building a submarine?

yellow?

[///M5 2,833]

Sort of the kind kids play with, non-hardening. I use it on both sides of my mdf baffles.

[topgun 262]

Killing time between classes.

[Aaron Clinton 2,372]

you building a submarine?

New job is working with UUV's (underwater unmanned vehicles), and I am tasked out to track down some major components. All of which have a great deal of limiting factors that are hard to meet so far.

[///M5 2,833]

cool

[///M5 2,833]

tOp