Welcome to the IHoP

[Tirefryr 1,742]

LEt me know how you like that. It is the only DVD player I can find without a flipdown face other than a JVC unit, which, isn't bad, but it isn't great either.

[Impious 1,476]

My only grip so far is that it takes about 10 seconds to load up a disc after you insert it or start up the car.

[///M5 2,833]

How is the interface?

[Impious 1,476]

How is the interface?

Sucks to control the H701 with, compared to the RUX control unit.

But, it works.....and IMO is better than having to deal with dual units ton control your stereo with.

[Impious 1,476]

What really sucks....is that I have like $300 worth of cables in my garage that I need to get around to selling for 1/4 what I paid for them

[///M5 2,833]

How is the interface?

Sucks to control the H701 with, compared to the RUX control unit.

But, it works.....and IMO is better than having to deal with dual units ton control your stereo with.

That's what I figured, too bad to hear but I'd still like the combo myself.

Good luck with the cables.

[CBFryman 2]

I had a good run tonight. After 4 miles at a reletively fast pace I felt like I could have gone much faster/a few miles longer.

The girl was ready to go though so I ended it with 4miles and a mile cool down.

[topgun 262]

My schedule this semester is going to totally kick my ass, Calc 2, Chem 2, Intro to EE, Logic circuits, and Electronic Materials

And two jobs...

[vladd 26]

on a hella slow conneciton, but things are going so friggin great. I can't type most of it out because it just shouldn't be known yet.

and..jim, if you get this, call me!

[topgun 262]

Good to hear that!

[JimJ 11]

FUCK...

Coming back from the airport, good-sized deer decided to try me.

Went into the driver's side just past the door, left a decent sized dent in the lower panel. Bent the bottom pretty well. Sounded a lot worse than what it looks like, but I guess I'll see the full effect in the daytime.

Oh well, it's off to the body shop tomorrow morning Might as well get the surface rust taken care of at the same time, lol, might as well have it come out looking better than it went in.

[JimJ 11]

And BB&T's phones and online services are down, so I can't check the balance in my account until morning.

Some things just tell you "get the hell to bed and call it a night."

[JimJ 11]

With that, I shall *poof*

Pictures coming tomorrow

[Eldorado 0]

Hey Elias how hot do you cook your pizza's?

<{POST_SNAPBACK}>

510deg.

The conveyor ovens work differently than your average oven.

They blow hot air on the food pulling out all the moisture so they cook faster.

Thats why brick ovens are better but take longer

[Godsmack 361]

Its reletively strong (for cardboard) and lowes had the 8" in 48" sections though I've seen much longer, especially in the larger diameters. Comes in 6,8, 10, and 12 inches.

<{POST_SNAPBACK}>

i need like 15 feet

<{POST_SNAPBACK}>

In what diameter?

I dont think they have it that long in any bit you could fiberglass two pexces togather.

Otherwise PVC and ABS drain pipe are the only other options and they cost $$$$.

<{POST_SNAPBACK}>

Home safe...........just finally got a chance to get on. And quickrete has tubes about those sizes for 30 bones a pop for 5 ft. tall.

I may be on some but not much through the 15th. Want to talk to me pm me.

J

[jntar 15]

Staying up til 3:15 am glassing kicks then waking up at 6am for a hair cut, not work in a few suxzorz. Today is going to dragggggggg out.

[///M5 2,833]

Hey Elias how hot do you cook your pizza's?

510deg.

The conveyor ovens work differently than your average oven.

They blow hot air on the food pulling out all the moisture so they cook faster.

Thats why brick ovens are better but take longer

I have a brick/convection oven sort of. A pizza stone on my komodo grill and its very similar. Wondering on the temp because the bottom of my crust is beautiful but the top isn't browning. I think my stone may block too much of the direct heat that wraps around it. Last night I did them at 675 degrees though so maybe dropping it a notch will help.

[///M5 2,833]

Staying up til 3:15 am glassing kicks then waking up at 6am for a hair cut, not work in a few suxzorz.  Today is going to dragggggggg out.

I can't imagine getting up that early for a haircut, but you know we'd like to see pics of your kicks.

[mrray13 30]

i have nothing to say...

except good morning, and i'm outa here for work...

i need to post pics of the h1, the lincoln, the highlander and the supra...

yeah, lol, work's been crazy....

laters fine people of ssa!!

*poof*

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[CBFryman 2]

My Notes

That link is for M5 to analyze my precalculus notes. Everything we do in class is loaded to that site and translated into *.pdf format.

pretty nifty.

Going over everything that he said we will be learing...I already know most of it all .

Pre-Calc = Breeze for me probably.

[CBFryman 2]

What do you all think about an upfiring port? I think that is where im headed.

[///M5 2,833]

Your notes link doesn't work...

[///M5 2,833]

<--- doesn't want to do math anyway.

[///M5 2,833]

Matt on things being better.

What's up Jim?

[JimJ 11]

I heard an upfiring port setup in a Ranger once...two 10" Rockford HX2's, amp rack, single port in the center.

Got decently loud, surprised me.