Welcome to the IHoP

[ramos 2]

Mr Jim , what did you use to attach the plexi over the holes in your doors ?

[Worlddre 1]

here i sit watching family matters until the mail comes

[///M5 2,833]

Mr Jim , what did you use to attach the plexi over the holes in your doors ?

I screwed mine in with sheetmetal screws, but made the error of putting it on the outside instead of the inside making it a real beyotch to put the door skin back on.

[///M5 2,833]

What is the smallest "full range" folded horn you guys have seen?

[CBFryman 2]

Barring Ocala , and the Everglades (cause of the people ), and little chit places like Howey in the Hills, Gibsonton, Brandon, and Ruskin. Everywhere else in the entire state seems like the movie version of the "hood" to me now. I spent 20 years of my teenage, and 20's living in FL . Culture shock to the umpteenth power when I moved up here  I'm telling ya , SWVA is a strange place for a rather diverse melting pot skewed by the inbred necks pissing in the pot. I mean come on , where else do you get hispanic rednecks ?? Go to a car show and see pagans hanging out with Muslims. Old biker trash dikey looking women, dressed like fonsy with the cigs rolled in the sleeves and all. Driving riced out scions's setting on 22 spinners, bagged, big arse wing on top, ugly arse body kit, some kenwood tornadoes in a prefab flea market bandpass, big ole pyramid super blue 4channel with about 8 gazillion wires bunched up in the terminals, enough neon to make vegas jealous, and train horns. Retired couple hauling around a one of three made, shelby cobra, made by Carol Shelby himself , for himself. Pulling it with a rig of at least equal value. Another retired couple. Driving a pt crusier , with a body kit, custom paint,  flames , 18" rims , flea market subs in a fleamarket bandpass, and big rockwood amp for the subs.  Wanging the Little John, DMX, and some good old snoop . Dudes driving slammed pickups with a pair of vise grips for a steering wheel, and an air compressor to sit on. And enter the chit in the competition.  All at the same car show. Where else do you get that kind of diversity ?

<{POST_SNAPBACK}>

California.

I don

[ramos 2]

Mr Jim , what did you use to attach the plexi over the holes in your doors ?

<{POST_SNAPBACK}>

I screwed mine in with sheetmetal screws, but made the error of putting it on the outside instead of the inside making it a real beyotch to put the door skin back on.

<{POST_SNAPBACK}>

Was going to , but the damn window is so close to the interior panel . I don't think I have enough room for screws , or nuts and bolts. Thinking about using the liquid poly . Oh wait , I'm not supposed to speak of the tcab secrets

[///M5 2,833]

NP used liquid nails to glue his on.

[ramos 2]

Can't stand that crap

[///M5 2,833]

I need to come up with a way to make a tweeter mount like this. I wish I had a milling machine.

[///M5 2,833]

Can't stand that crap

I hear ya, but since it worked for him I though I'd share.

[ramos 2]

Can't stand that crap

<{POST_SNAPBACK}>

I hear ya, but since it worked for him I though I'd share.

<{POST_SNAPBACK}>

I know , just griping man. Got a friend and his answer is either duct tape , or liquid nails

[CBFryman 2]

I need to come up with a way to make a tweeter mount like this.  I wish I had a milling machine.

<{POST_SNAPBACK}>

[Acidburn 10]

Oh and there is a turbo kit for the 4cyl S10 that make them put down over 250 to the ground with little tuning and 89 octane fule (if memory serves). Timing adjustment, more fule, more boost, and higher octane i'd imagine it would be able to step well into the 300's. 3" open exaust will add a few more ponies too. Intake manifold and heads...Alcohol injection wouldnt hurt either.

I'd imagine you could have a streetable S-10 sitting in the 400hp range with thoes measly little 4cyls...just dont run full boost too often .

Or you could just drop a highly modded supercharged 350 like he did . The mickey thompsons , and the tubbed out bed are a dead give away had they bothered to notice . The guy drags it every weekend locally. 400 hp is an understatement

you wouldn't happen to have pics would you?

Gonna get a new camera , and I see the guy around every now and then. Soon as I get another camera I will carry it with me and get pics of all the neck racin' machines I see

:woot:

[Acidburn 10]

Its gainsville...home of the most liberal college in Florida. Most people dont even beleive guns exist

go hang around downtown past midnight

there's not too good of a chance you'll get shot, but rape, stabbing, kidnapping, etc. are all quite likely

go do it, it'll be fun

Barring Ocala , and the Everglades (cause of the people ), and little chit places like Howey in the Hills, Gibsonton, Brandon, and Ruskin. Everywhere else in the entire state seems like the movie version of the "hood" to me now. I spent 20 years of my teenage, and 20's living in FL . Culture shock to the umpteenth power when I moved up here I'm telling ya , SWVA is a strange place for a rather diverse melting pot skewed by the inbred necks pissing in the pot. I mean come on , where else do you get hispanic rednecks ?? Go to a car show and see pagans hanging out with Muslims. Old biker trash dikey looking women, dressed like fonsy with the cigs rolled in the sleeves and all. Driving riced out scions's setting on 22 spinners, bagged, big arse wing on top, ugly arse body kit, some kenwood tornadoes in a prefab flea market bandpass, big ole pyramid super blue 4channel with about 8 gazillion wires bunched up in the terminals, enough neon to make vegas jealous, and train horns. Retired couple hauling around a one of three made, shelby cobra, made by Carol Shelby himself , for himself. Pulling it with a rig of at least equal value. Another retired couple. Driving a pt crusier , with a body kit, custom paint, flames , 18" rims , flea market subs in a fleamarket bandpass, and big rockwood amp for the subs. Wanging the Little John, DMX, and some good old snoop . Dudes driving slammed pickups with a pair of vise grips for a steering wheel, and an air compressor to sit on. And enter the chit in the competition. All at the same car show. Where else do you get that kind of diversity ?

the Ocala Forest brings a whole new definition to the word creepy

definitely some psychotic 'necks out in dem dere woods

[Acidburn 10]

I need to come up with a way to make a tweeter mount like this.  I wish I had a milling machine.

pic didnt work

[///M5 2,833]

stupid friggin website

its funny cause it worked for about 5 minutes on my machine, but now I moved it to imageshack

[///M5 2,833]

now the link is working above again, at least for me

[///M5 2,833]

Found out that my diffuser cone does not have to be parabolic, in fact a straight cone works just as well. It should make it easier to make. Paper cone and some plaster and bam.

[///M5 2,833]

/\ won't require sanding!!

[dennisp 0]

Hey.

[CBFryman 2]

stupid friggin website

its funny cause it worked for about 5 minutes on my machine, but now I moved it to imageshack

<{POST_SNAPBACK}>

That is rather nifty.

[Acidburn 10]

Hey.

HELLO DENNIS!

[Acidburn 10]

http://videos.streetfire.net/video/619468c...8080025e171.htm

check it out

[topgun 262]

Oh and there is a turbo kit for the 4cyl S10 that make them put down over 250 to the ground with little tuning and 89 octane fule (if memory serves). Timing adjustment, more fule, more boost, and higher octane i'd imagine it would be able to step well into the 300's. 3" open exaust will add a few more ponies too. Intake manifold and heads...Alcohol injection wouldnt hurt either.

I'd imagine you could have a streetable S-10 sitting in the 400hp range with thoes measly little 4cyls...just dont run full boost too often .

Why the fudge would you want to do that??

I need to come up with a way to make a tweeter mount like this.  I wish I had a milling machine.

Dad's got one.....

[CBFryman 2]

To have something no one else does.