Welcome to the IHoP

[Beat_Dominator 2]

Yeah

...and they don't know any better.

[Penny 0]

kinda like college students.

[JimJ 11]

Pretty much...

[Beat_Dominator 2]

Yeah

[Eldorado 0]

Stupid rain !

i might paint my amp today

depends if i can swing by baller mart or not

[Beat_Dominator 2]

I painted part of my Carver yesterday....but then I flipped it over thinking it was dry enough...but it wasn't :mad:

Now I gotta sand and re-paint the once side

[Eldorado 0]

That sucks man

I might just throw mine in the oven and cook it for a while so the paint will dry.

Last time i didnt wait for the paint to fully dry and it cost me...big time.

Im not to shure how hot to set it at, gas ovens arent a steady heat

[Beat_Dominator 2]

Yeah, this was just the face plate....but I had put 4 coats on it

At least it wasn't a BIG piece.

[Eldorado 0]

What kind of paint did you use ?

[jntar 15]

I'd love to see what 4kw would do, you will have to post some vids.

<{POST_SNAPBACK}>

We are pushing 5k+ to the DDs and probly 6k+ to the MTs

(2) IA 20.1 strapped at .175

.

..

...

....and they dont even get warm

[Eldorado 0]

Play some music on them for 30 min...then tell us if they get hot

[jntar 15]

I really hope I can get my hands on an MT for a good price this summer so I can see for myself the difference vs my 9515's.

<{POST_SNAPBACK}>

TO be honest. The DDs dont like to move very much or get as low as the MTs can. That said, the DDs are a much better Daily sub, they sound great on 1200rms each.

The MTs like as much power as you can give it. Out direct drop test was a failure due to the fact that one driver is broke in and the other isnt. This caused one to over play the other and cause phase/canellation issues.

We are glueing tonight...Ill get new numbers up.

[jntar 15]

Play some music on them for 30 min...then tell us if they get hot

<{POST_SNAPBACK}>

No they dont. .35 on one amp played for a 4 hour trip...I could still put my hand on it...it couldnt have been over 100*F

[Eldorado 0]

Was it wanging or just normal low volume music ?

[Beat_Dominator 2]

Spray Piant and clear enamel.

[///M5 2,833]

.35 sweet!

[jntar 15]

Was it wanging or just normal low volume music ?

<{POST_SNAPBACK}>

Wanging like a mofo

[jntar 15]

.35 sweet!

<{POST_SNAPBACK}>

That nothing...I have been known to beat on the DDs strapped at .35 which is .175 on each amp. They get warm, but not too hot to the touch.

.175 strapped... .0875 on each amp they get hot on tones but music they are just warm again.

[jntar 15]

Honestly, I have had many a HCCA orion. They were my fav amp until the 20.1 amps. The 20.1s arent current hoggs, still play without problems when voltage drops to 10v. Can be strapped so damn low it isnt funny...any other amp would chit themselves. All for ~$500

[///M5 2,833]

Not only would the amp chit themselves but I might sitting in the car.

[///M5 2,833]

The brakes are in bed now. Was really hard to get them hot enough to fade at all, but they had that blue/gray tint when finished! Took a good 10 really quick slow downs from 80 to 15 before the seemed to heat up. Afterwards I took a little drive and they are definetely as tight as the stock brakes, but since I get to log 330 miles tonight I will feel them out.

[Eldorado 0]

Was it wanging or just normal low volume music ?

<{POST_SNAPBACK}>

Wanging like a mofo

<{POST_SNAPBACK}>

sveeettt

[Eldorado 0]

Im making another vid

Its definetly worth the quicktime download

[Devillain 0]

Double baffling my box is gonna make it look funny. Im thinking of making a ring. It has to be done one way or the other.

[Eldorado 0]

ring with fleece stretched to the corners with resin on it.