Box help

[lolitskasey 0]

I need some help building a ported box. I wanted it to be Width:44 Hight:20 Depth:17 And tuned too 34 Hz.

I have never build a ported box before lol. This is for a fully loaded BL 15.

[lolitskasey 0]

Bump

[lee 2]

You need 2 subs for that space. Or an 18''

[BKOLFO4 29]

You can just corner fill the rear side opposite the port wall or cut some off the width.

I can design a box for you. . .

Do you want less width, or would you rather it be that wide and just add a piece inside the box to fill some of the width?

[Smallk07 0]

You can just corner fill the rear side opposite the port wall or cut some off the width.

I can design a box for you. . .

Do you want less width, or would you rather it be that wide and just add a piece inside the box to fill some of the width?

how much do you charge for custom boxes

[lolitskasey 0]

You can just corner fill the rear side opposite the port wall or cut some off the width.

I can design a box for you. . .

Do you want less width, or would you rather it be that wide and just add a piece inside the box to fill some of the width?

What ever would sound the best i just cant change the depth it has to stay 17 but the room im working with is Width:48 Depth:17 And Hight: is like 30( im in a van) so yeah if you can design a box that would be great.

[lolitskasey 0]

Bump

[christobear 0]

You can just corner fill the rear side opposite the port wall or cut some off the width.

I can design a box for you. . .

Do you want less width, or would you rather it be that wide and just add a piece inside the box to fill some of the width?

how much do you charge for custom boxes

i dont think he actually builds boxes, he's just gonna help this guy figure out his design.

look at fisher customs if you want a really sweet custom box

[BKOLFO4 29]

If you are local to North Texas, I will build you something, but I am not interested in building and shipping.

If you find someone to build it that cannot do the design, let me know and I will design one for you.

Brian

[lolitskasey 0]

If you are local to North Texas, I will build you something, but I am not interested in building and shipping.

If you find someone to build it that cannot do the design, let me know and I will design one for you.

Brian

I can build it i have the wood and everything i just have never built a ported box before and i need some help like with the tuning and stuff.

[BKOLFO4 29]

Make it 34.5" wide x 20" high x 17" deep. 3/4" material except double the sub mounting baffle so it is 1.5" thick.

Port will be 18.5" x 3". It will be 25" long, so run it into the box so it is 3" from the rear wall and then turn and go 8" parallel to the back wall.

Brian

[lolitskasey 0]

Thank you so much brian.

[lolitskasey 0]

Dose it matter where i put the port?

[BKOLFO4 29]

What vehicle is it?

I designed it assuming the sub and port would be on the 34.5" x 20" side. The port will be on the driver's side, sub centered between the port and opposite wall.

Brian

[lolitskasey 0]

What vehicle is it?

I designed it assuming the sub and port would be on the 34.5" x 20" side. The port will be on the driver's side, sub centered between the port and opposite wall.

Brian

The vehicle is a 96 nissan quest. And i was thinking about putting the sub facing the roof of the car and the port facing the roof aswell would that sound better?

[BKOLFO4 29]

Make it 33.75" wide x 20" high x 17" deep. 3/4" material except double the sub mounting baffle so it is 1.5" thick.

Sub and port will be on the 33.75" x 17" face.

Port will be 15.5" x 3.5". It will be 28" long, so run it into the box so it is 3.5" from the rear wall and then turn and go 8" parallel to the back wall.

Brian

[lolitskasey 0]

Thank you brian so much i owe you my life lol.