RE sub

[billystorms24 1]

Hey guys whats up im doinga build for my ROOM haha. I have a sub in my car why not at home! Ok So i bought a RE SR10-D4 10", here are the specs. I want to Make a slot vented box 1cf tuned 34 hz. Iam going to put 300 rms. Ive built boxes before But i still dont know how to design one on my own so im asking for you guys to help me with the buildcould someone design a box for me i want the sub to be top mounted with the port on the side. I just need a cut out sheet with the dimensions of the box thanks a lot guys

billy

Specs of the sub

* Kraft Pulp Cone

* Rubatek Foam Surround

* Pressed Steel Basket

* 4-layer Copper Voice Coil

[dbjunior 0]

is the box just for music or home theatre

[billystorms24 1]

Its for music

[dbjunior 0]

considering its for home use i would make the box bigger and tune around 30hz for ht use i would tune around 20hz. the box suggesttions are based on in car use.

[///M5 2,833]

How big is your room? I'd also agree that it needs to be tuned lower, way lower. More cone area wouldn't hurt.

What amp are you using?

[billystorms24 1]

my room is about 12x9. Why would i want it tuned lower it would just be too much? Now with the amp i wasthinking of getting a car amp 300 rms and getting a 12 volt powers supply giving out 40 amps. If anybody can think of a better was please let me know. i was also thinking putting the dual 4 ohm coils into 8 ohm and using a home amp with a low pass filter.

[JimJ 11]

Don't use a 12V amp at home, do it the right way

You don't have an exaggerated cabin gain in a room in the same way you have it in a vehicle, so tuning that high will likely lead to something very peaky sounding, much more so than in a vehicle.

I thought the SR did best sealed when I heard it, but that's just me

[billystorms24 1]

Can somebody work on a box design and cut out sheet for me please

[billystorms24 1]

anybody? lol id really appreciate it

[Duran 387]

How much will ya give me? HAHA, JK. BJ Fisher can do one for you, a cutout sheet...I believe its $12.

[billystorms24 1]

How much will ya give me? HAHA, JK. BJ Fisher can do one for you, a cutout sheet...I believe its $12.

Hahaha Yea thats where i had my box built that im using now in my car ..great guys to deal with. i might just do that. but id still like to get more input on what tuning and how big the box will be.

[billystorms24 1]

ok what im thinking of doing i have a pro audio amp. Its a qsc rmx 1450 i'd use only 1 channel its like 280 a channel at 8 ohm and i need to get a subwoofer crossover/filter what do you think i should go with?

[JimJ 11]

Not a bad amp if you're thinking about upgrading in the future, although I'd probably just get a plate amp for the SR if you don't have any immediate upgrade plans...

[billystorms24 1]

i was thinking that .... yea that qsc amp will got bridged mono 900 watts at 8 ohm which is pretty good what wattage should i get on the plate amp?

[JimJ 11]

250-500W...

[billystorms24 1]

http://cgi.ebay.com/CLARION-EQS746-7-BAND-...bayphotohosting will this work good with the qsc amp

[billystorms24 1]

anybody?

[akjay907 0]

give me specs on size of box and ill render you a box design on google sketchup

personally i have have a 75 watt modified guitar amp driving my audiobahn ALUM10 in a sealed enclosre and its pretty loud. 75w is alot for home