Help me Build a Box

[JoshM20 0]

Hey everyone,

I am going to build a box for 2 Fi Q 10's and I would like to know your opinion on the best bex cubic feet and design wise, to get the absolute best SQ, and should I have it sealed or vented? If vented, how should it be tuned for the best SQ. I want these 10's to have a really, Tight, Bass sound.

[JimJ 11]

Sealed, follow the recommendations listed by Fi...

[JoshM20 0]

sounds good, and when you calculate cubic feet inside the box you subtract the thickness of the mdf twice dont you?

[stealth 113]

how about lets all forget that you asked the last question and think about it for a while.

[JoshM20 0]

how about lets all forget that you asked the last question and think about it for a while.

That's what I was told, Sorry for asking, to double check. I'm sure everyone here was born with the knowlege of building box's, and calculating cubic feet inside the box.

[JoshM20 0]

how about lets all forget that you asked the last question and think about it for a while.

I will even give you the benefit of the doubt, after looking back to my wording, how I posted the question may have confused people.

What I meant by subract by 2 was 1 cubic foot is = too 12x12x12 each 12 or variable representing height, depth, and width. Now if your sub specified that you need 1 cubic ft of airspace you would have to calculate this into the design. Example. If you use 1/2'' MDF and built the box 12x12x12 the (Outside) of the box (what you can see and feel) will take up 1 Cubic foot of airspace. Yet the (Inside or Chamber) would only be around .77 or so cubic ft of airspace (inside) the box. So when I asked to subtract by 2 I meant the width of the MDF per variable. So I can maybe see where you might have not understood my question, maybe?

Anyways, I believe this is the correct way to find the (Inside) airspace, If not, let me know how, this is just how I was told to calculate it.

Thx

Josh

[nick_19 1]

Take it slower man.

What kind of music do you listen to?

[RobClay 20]

http://www.soundsolutionsaudio.com/home/in...tools/box-tools

[JoshM20 0]

Take it slower man.

What kind of music do you listen to?

hibbidy hop