Need help with specs for some MTXs

[mrray13 30]

i can't believe u two ramblied on overlooking my ingenious, humorous post...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[mrray13 30]

btw tire...

when u get time...hit me up with an email explaining how u can tell if the sub isn't going to handle a certain amount of power in a given enclosure....with bb6p of course..lol

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Aaron Clinton 2,372]

kent there is a topic in the "wink wink" that fits that discription

[Tirefryr 1,742]

Okay, here goes everything for you. First will be the EM params.

The enclosure is 4 cubes with 25sq.in. of port area. The tuning is 26Hz. Vent length is 21.25"

[Tirefryr 1,742]

And the response graph.

Cone displacement with 300watts. It gets pretty dicey with anything more than 350, so I just graphed @300.

Impedance. This is sweet. No more than 9ohms and only below tuning with a small spike near 50Hz. Impressive for a vented enclosure.

And finally vent velocity. Pretty good here. Way under any audible numbers. 14m/s seems to be the most, and you'll never see that unless playing below tuning.

[80INCHES 0]

WOW THATS COOL......HEY TIRE ME AND U USE THE SAME PROGRAM

BUT TRY THIS.....HOW ABOUT PUTTING THE 10'S IN A BANDPASS

MAKE THE BOX 13D x 13H x 36W

THE SUBS ARE FACING EACH OTHER

THE BAFFLE THE WOOFER IS MOUNTED HAS 2 BE 9INCHES FRON THE WALL

AND THE PORT 7 x 3 x 7D

ITS JUST AN IDEA,,,,PUNCH IT IN YOUR PROGRAM AND SEE WHAT COMES UP...I DID THIS WAY THE XMAX CAN BE MORE CONTROLED AND DENIM CAN PUT 500W TO IT

80

JUST GIVING IDEAS

[Aaron Clinton 2,372]

could someone hook me up with a cut sheet if they are bored, no rush,

just want to build a box for these and the pups at the same time

[Tirefryr 1,742]

could someone hook me up with a cut sheet if they are bored, no rush, 

just want to build a box for these and the pups at the same time

Dims?

[Aaron Clinton 2,372]

could someone hook me up with a cut sheet if they are bored, no rush,

[Tirefryr 1,742]

[Aaron Clinton 2,372]

is that for a sealed box?

[Tirefryr 1,742]

Yes, if you want vented, let me know. I thought those were the dimensions you had wanted for the enitre thing. Or is that the maximum you have to work with? Just leave me all the necessary info here and I'll have it up for you.

[80INCHES 0]

HEY TIRE HOW DID U POST THE BASSBOX PRO PICS OF THE GRAPH ON TO THIS FORUM...I HAVE A DESIGN I WAS TO SHARE WITH A FELLOW MEMBER AND I WANT TO POST IT

80

[Tirefryr 1,742]

HEY TIRE HOW DID U POST THE BASSBOX PRO PICS OF THE GRAPH ON TO THIS FORUM...I HAVE A DESIGN I WAS TO SHARE WITH A FELLOW MEMBER AND I WANT TO POST IT

80

Check your PMs.

[Aaron Clinton 2,372]

Yes, if you want vented, let me know.  I thought those were the dimensions you had wanted for the enitre thing.  Or is that the maximum you have to work with?  Just leave me all the necessary info here and I'll have it up for you.

thats just the max dimensions I was hoping to work with for the box, I was hoping to run them ported for fun and see what happens