AudioControl EQS for active

[nickeveready 0]

would this paired with an Alpine iDA-X100(ipod deck) be a good match for processing if I wanted to run 2 or 3 way active? any thoughts from people who have or is currently running this eq.

http://www.sonicelectronix.com/item_6358_A...EQS+-GRAY-.html

Edited September 18, 2008 by nickeveready

[nickeveready 0]

don't all answer at once!!

Edited September 18, 2008 by nickeveready

[audiolife 14]

http://www.sonicelectronix.com/item_13554_...ontrol+DQX.html - eq and 3 way crossover -active digital

http://www.sonicelectronix.com/item_7197_A...OR-+WHITE-.html -eq and 2 way xover -active analog

[helotaxi 46]

Lots of wasted bands of equalization with that processor installed after the crossover. Consider that every band below a HPF and above a LPF is not doing anything and it should quickly become apparent that there isn't a lot of use for that processor in a high end system using active processing. It has its place, but not in a 3-way active system.

[nickeveready 0]

so what are some good processors out there that can handle the job? as far as alpine goes the only option i have with them is the Imprint(pxa-h100)

Edited September 22, 2008 by nickeveready

[///M5 2,833]

The imprint is a big joke. If you want an Alpine processor, get the H701.

[nickeveready 0]

The imprint is a big joke. If you want an Alpine processor, get the H701.

don't think it's compatible with the ida-x100..i really want to get that hu

[///M5 2,833]

If you want to run active and are putting in a screen up front, you should really do the H701 but yes you will need the 205/505. Time to make the choice, a nice active install or that headunit. Sure you could still buy a H701 and a RUX to control it, but that seems rather stupid considering you don't have the screen yet.

[nickeveready 0]

If you want to run active and are putting in a screen up front, you should really do the H701 but yes you will need the 205/505. Time to make the choice, a nice active install or that headunit. Sure you could still buy a H701 and a RUX to control it, but that seems rather stupid considering you don't have the screen yet.

the ida-x100 is the ipod hu not a screen, though it does have a screen on it. but i see what you mean

[Adrian_D 520]

so what are some good processors out there that can handle the job? as far as alpine goes the only option i have with them is the Imprint(pxa-h100)

The H100 can do a 2-way + sub setup. I'm not sure how you can control it completely.