Midbass driver

[nick_19 1]

Hey guys. I've got a little 6.5 inch woofer that I am going to use a midbass driver.

What kind of enclosure should I put it in? Sealed or ported and what size/tuning?

Thanks guys. It will be run off of about 50~60 watts.

[JimJ 11]

I assume you mean you have two of these?

Midbass is stereo, does you no good just to have one.

[nick_19 1]

Won't be better than nothing? And I would have used it in the center of the vehicle...

I cannot do any mods to the doors or kicks... I am just looking for anything. Not going for super SQ, I just want to have some midbass...

I know it's ghetto, but I'm tryin to get by.

[///M5 2,833]

I wouldn't use one. On top of that without knowing exactly what the driver is no one can help you with your questions.

[nick_19 1]

And by midbass I mean like 80-120 htz... not a midrange. Still don't go w/ just one?

[///M5 2,833]

By midbass I'd assume you mean somewhere closer to 40hz-300hz or a little less on each end, and YES you need a matched pair.

[nick_19 1]

kkk thanks

[KU40 173]

If you're really bored or still just curious, may as well give it a try though. It doesn't need a big enclosure, probably .2-.3 cubes sealed will be plenty.

[nick_19 1]

Ok thank you. Would you say ported or sealed?

[///M5 2,833]

On top of that without knowing exactly what the driver is no one can help you with your questions.

Please answer questions before re-asking the same one.

[nick_19 1]

I do not know.

It is a driver off of a home system.

This is for fun. It comes stock in a ~ .03 cuft box tuned to somwhere around 42 htz.

This is an experiment. For fun. I just want to try this out and see what happens.

[emperorjj1 2]

go sealed... without driver specs u can never get the "right" box

[///M5 2,833]

Actually in a car, I'd say go IB if you don't know. Otherwise get ready to build a bunch of different boxes.

I will add though it makes no sense to build a box for a driver you know nothing about. You'd be much better off just buying some other drivers.