limo company

[jonbearsmt 919]

i kinda went partners with a man in a limo company... i wanna show yall the limos and alos the problem must deal with right away... i will neeed help so here goes

the party bus is starting here.

its in work... should be painted by friday.. all black.

black lincoln towncar limo..

it all has to be worked on but here is my biggest problem

it has dual alts, currently the driver must take that green clamp you see and conect it to purn on the power for the back.. and the wire looks unsafe to me

also im not quite sure but i wanna get this looking better.

next up

navi

now the problems.

dual alts and thats the second cell... along with a jumper box thay use to jumpstart the second cell!

now on to the ole girl the one that started it all...

and she has issues too....

alot of work ahead and i will need help.... so thanks in advance.

[Acidburn 10]

oh my, that navi is a mess

good luck

[JimJ 11]

Whoever built that Navi would make Pimpedout97ex proud...

[jonbearsmt 919]

oh my, that navi is a mess

good luck

thay are all.... i need help to get these fixed... fast

[///M5 2,833]

Whoever built that Navi would make Pimpedout97ex proud...

rofl

Good luck and best wishes! Cool to be a business owner for sure.

[NB50 206]

So what are you asking help for, wiring, ways to run it, you weren't clear on what you needed help with.

[jonbearsmt 919]

i need help re doing all the wiring and re doing the solenoids...

the wiring on the dual alts does not look right to me... making sure that my thoughts and reality are the same!

[manbeer 0]

congratulations on the new venture

The guys who build those things are barely a step up from a chop shop. i had a friend in the business a while back and he was telling me the chit was always an electrical nightmare, he'd get brand new cars and send them out and get them back with the idiot lights lit up like an xmas tree. then you get all the people throughout the years of ownership who have their own people do the work and it can be a major PITA to figure out what the hell is going on. might wanna remove as much of the wiring as possible, label what you know and start from scratch, so down the road if you have a problem it'll be much quicker to retrace YOUR work

Edited September 4, 2008 by manbeer

[jonbearsmt 919]

congratulations on the new venture

The guys who build those things are barely a step up from a chop shop. i had a friend in the business a while back and he was telling me the chit was always an electrical nightmare, he'd get brand new cars and send them out and get them back with the idiot lights lit up like an xmas tree. then you get all the people throughout the years of ownership who have their own people do the work and it can be a major PITA to figure out what the hell is going on. might wanna remove as much of the wiring as possible, label what you know and start from scratch, so down the road if you have a problem it'll be much quicker to retrace YOUR work

i would love too! but we need the limos ready to leave within an hour at any time of the day..

its gonna be a real task that no doubt.

[patented17 21]

Just going to have to hold one back, for repairs. I would rather take some time to fix one, and get the wiring straight. Then to have something go wrong and have the whole thing go into flames.

[jonbearsmt 919]

Just going to have to hold one back, for repairs. I would rather take some time to fix one, and get the wiring straight. Then to have something go wrong and have the whole thing go into flames.

i know i know i told him the same thing but im a JR. partner... thay are his limos... he paid for them!

[coobies5 43]

if you're lookin for someone to help out with, like doing the dirty work, let me know, i need a side job and i can make the drive out there, and find a place to stay. if not, then best of luck to ya bigjon, should be headed out there in a few weeks after i get my newly acquired sandwich here along with some other knick knacks.

[johnecon2001 82]

Just going to have to hold one back, for repairs. I would rather take some time to fix one, and get the wiring straight. Then to have something go wrong and have the whole thing go into flames.

To be honest though man, put your foot down. Tell him to take one off the list. Then rip out everything (make sure to make a log so you know what has to go back in) and start from scratch.

A little pre-planning wouldn't hurt either, so before you hold one back, crawl through them and measure and figur out what you need to buy.

This'll be for the better if you have an uninterrupted time with the car.

As far as the solenoid goes... do you really need one? One of the alts should be dedicated to essential car shit, and the other for anything the limo itself needs. I don't really get why there is even one there if there is a dual alternator setup.

[Chevy350TPI 12]

Good luck with it!

I know a couple guys who own transport businesses and they say that their limos are always in the shop being fixed ... rear ends and driveshafts mainly, along with the clusterf!ck wiring hack jobs usually found.

[jonbearsmt 919]

i dont understand why it has a dual alt with no where to put all that curent... only one crappy ass 800 cca duracrap,

the problem is witch to start on... thay are all in need of desprit attention.

the only reason for a solenoid is so that everything in the rear can be powered up with one switch.... so that while no one is back there the drive can cut everything off and on.. when people get in... other wise i would just throw a cell in the rear and do it up... but i have to really think this out... cause there is soooo many wires... i would have to re route everything...

[jonbearsmt 919]

if you're lookin for someone to help out with, like doing the dirty work, let me know, i need a side job and i can make the drive out there, and find a place to stay. if not, then best of luck to ya bigjon, should be headed out there in a few weeks after i get my newly acquired sandwich here along with some other knick knacks.

if it was in the budget i would buddy.. but as it is were not able to pay people.. i wish i was able to pay for help as im sure you can see i need it!

whens that hoggie comming in?

[jonbearsmt 919]

http://www.rslimo.com

website fosho

[jonbearsmt 919]

bus update.. more coming tonight

[jonbearsmt 919]

update

[rushnrun 14]

I'm a big fan of removing everything I don't know or understand and rewire.... you shoulda seen my parents HT kinda looked like the truck wiring

[pimpedout97x 4]

Whoever built that Navi would make Pimpedout97ex proud...

wtf!

lol

[jonbearsmt 919]

i did alot of work on tha navi in the past two days......

8 new speakers all 4 ohm wired into two channels at 4 ohms,

150 feet of speaker wire

30 feet of power

1 total amp,

1 10 inch sub,

new sony cd/mp3

brand new set of 22's

also clean up ALOT of the fucking mess behind the driver seat, added alot of shit

also we bought two coach buses,

and the party buss is done! ill add pics later today...

o were doing a gig tonight for Breal from cypress hill tonight... should be fun!

[Tmax98 3]

sounds great man!

glad to see u get the ball rollin man!

[Aaron Clinton 2,372]

Thanks for the update. Looking forward to pictures. Very fun to watch something different as this.

[lee 2]

hahahaha.......gotta love a bus