BTL power?

[chevy454 0]

will i have to give a btl 2500+ watts to power it correctly?

[chad.SQ 0]

No. You don't HAVE to feed it that much power. You just CAN feed that much power.

[jonbearsmt 919]

you can send it muchmore power then that.

but it is the most effecient sub in fi's line watt for watt.... but the spiders are stiff.

[~DIGITAL~BASS~ 0]

you can send it muchmore power then that.

but it is the most effecient sub in fi's line watt for watt.... but the spiders are stiff.

Your serious? So your saying if i have all 12" subs. Including q,ssd,btl and bl and give it all 500watts the btl will be the loudest because it is FI's most efficient sub?

[jonbearsmt 919]

you can send it muchmore power then that.

but it is the most effecient sub in fi's line watt for watt.... but the spiders are stiff.

Your serious? So your saying if i have all 12" subs. Including q,ssd,btl and bl and give it all 500watts the btl will be the loudest because it is FI's most efficient sub?

yes.

[chad.SQ 0]

Before the new BTL and the old BTL had all its specs on Fi's site, i believe the sensitivity for a 12" bl was 90ish db? I know the 18" was 93.something. I dont remember, but the numbers were pretty high.

[~DIGITAL~BASS~ 0]

yes.

Eh. Real world application > specs.

[jonbearsmt 919]

read this topic.... i learned the hard way....

http://www.soundsolutionsaudio.com/forum/i...mp;#entry389367

[~DIGITAL~BASS~ 0]

Eh. Id like to test it.

[chevy454 0]

thankx for the resplies guys..what are some good amps that i can give two of these subs for about $800-$900

[emperorjj1 2]

T30001bd