Jump to content
Sign in to follow this  
trunks9_us

1500d amp setting tutorial help?

Recommended Posts

Hi purchased this sundown 1500d and i am needing a lil help with this amp setup. I need to know the difference btw the bass boost and the gain. I am using a stock hu using a david navone loc. Fist of all can this amp take more then 6 volts input voltage? 2nd how should i adjust the bass boost with the gain? I am not doing it right i only can tune by ear and it seems i keep clipping the amp because when i play a song when it hits a low note on the song it bottoms out on the sub pops ect. i turn it down problem goes away. How should i be adjust the gain/bass boost?

Share this post


Link to post
Share on other sites

No bass boost.

Also, if the sub goes "pop" back off the gains and properly setup your subsonic filter.

What subs are you using and also box specs would be nice.

Share this post


Link to post
Share on other sites
No bass boost.

Also, if the sub goes "pop" back off the gains and properly setup your subsonic filter.

What subs are you using and also box specs would be nice.

Ok i will fix this by turning off bass boost now and then I am running jbl gti's 2 of them at a 1.5 ohm load.

Whats the purpose of having the bassboost if not to use it then on a mono amp?

Box specs are.

L W H

26x36x12.5

L W D

Port is 11x4.5x18

Edited by trunks9_us

Share this post


Link to post
Share on other sites
No bass boost.

Also, if the sub goes "pop" back off the gains and properly setup your subsonic filter.

What subs are you using and also box specs would be nice.

exactly how should i set up the subsonic filter?

Share this post


Link to post
Share on other sites

Most users do not need to use the bass boost, although, some people may desire it to fit their needs it can easily clip the amp and hurt your woofer if used without caution.

Set the subsonic to 1/3 octave under the port tuning.

Share this post


Link to post
Share on other sites
Most users do not need to use the bass boost, although, some people may desire it to fit their needs it can easily clip the amp and hurt your woofer if used without caution.

Set the subsonic to 1/3 octave under the port tuning.

ok well i have had the subs there brand new and have had them powered with the bass boost up all the way i believe only for one week now should my subs be ok? I will be going to fix all of this now but will my subs be ok?

Share this post


Link to post
Share on other sites

If the subs are still working then, yes, they are fine.

I suggest turning the boost all the way down, or at least almost all the way down and using the gain to adjust the level of output.

Set the LPF about half way up and the subsonic around 1/4 - 1/3 turn up (whatever sounds best).

Share this post


Link to post
Share on other sites

Guys did everything yall said and it sounds great now thx so mucH! I lost a lil bass but for the sq it was worth it. It was sounding god awful.

Share this post


Link to post
Share on other sites
Guys did everything yall said and it sounds great now thx so mucH! I lost a lil bass but for the sq it was worth it. It was sounding god awful.

you probably didnt loose any bass at all distorted sound appears to be louder than something that sounds clean

Share this post


Link to post
Share on other sites
Sign in to follow this  

×