just a few questions..

[verybaddkidd 0]

I am interested in buying the FI Q 18" sub and i was wondering if it has a sub box included... also, do you ship to Canada?

Thanks alot, Mack.

[lilblacky 0]

Nope doesnt come with a box and yes they ship to canada =)

[verybaddkidd 0]

Woohoo!! Is it possible to order one?

[verybaddkidd 0]

I contacted all the car audio stores in my town and they will not (or can not) order 18" boxes. one place, Custom Car and Sound said they will build one but it is going to be on the upwards of +$450

[ABXX49 20]

If you have the basic tools, it's not hard to build a box. Just go around and look at some build logs and you'll pick up a lot from those. You can build your own box for under $75 I'd say. (or close) If you don't build your own box, you're going to pay. Unless you have a friend that can help you out.

[verybaddkidd 0]

if i build my own box am i risking quality?

Edited July 15, 2008 by verybaddkidd

[jonbearsmt 919]

I really would like the 18" Q but if i cant get the box for it, i will settle for the 15"

why do you wish to have an 18 anyhow?

[verybaddkidd 0]

the bigger the better

[verybaddkidd 0]

Thanks for all the help everyone.. i'll be back in a little while.

[///M5 2,833]

if i build my own box am i risking quality?

Probably the other way around. Putting a sub in a generic box is a very, very bad idea.

[verybaddkidd 0]

can you give me any tips regarding the technique that i build the box with?

[verybaddkidd 0]

Where could i find a diagram or measurements to build one? i'm new at this, lol sorry i suck

[jonbearsmt 919]

the bigger the better

not true at all.

[shizzzon 461]

Well lets start from the beginning, let us know if you AT LEAST have the following tools-

Tape Measure

Straight Edge

Pencil

Jigsaw or Router

Skilsaw or table saw

Power Drill

IF you got at least those, then the build will be easy since you got the right tools to get the job done.

Saw horses or any other way of cutting MDF is also a must.

If you have the minimum tools, then we can help you for sure.

[rob682e 0]

I have those tools --Very interested in this help :-).

[verybaddkidd 0]

the bigger the better

not true at all.

i know, just a figure of speech.

yeah i have those tools.what thickness of MDF am i going to need?

[verybaddkidd 0]

Is here a site where i can find the plans?