vc resistance on Q 12D2

[carguy6702 0]

what should the resistance be on the D2 models? i tested mine to day and i got 1.4ohms per vc.?is this right

[hayes55987 0]

I believe that is an acceptable number. Between 1.4 and 1.7 is about right for a two ohm

if it was below like 1 ohm or above 2 ohms then i'd be a bit worried. But i dont think in this case!

[NDMstang65 403]

1.4 is what it should be

[carguy6702 0]

1.4 is what it should be