Subaru Forester install

[samindaup 0]

Hello to all!

This is my first post and I'd like to get some info (please). I've a 2007 Subaru Forester that I plan on having a system installed and have some questions concerning the install. The system will consist of Tru amps, t03-250.2 (for sub) & t03-4.150 (for front tweets & mids). HU will be Clarion DRZ-9255. The speaks will be either Hybrid Audio Referernce or Seas Reference. Anyway, here are the questions & pardon me, I know only enough about installs to start a fire.

1-Are the DRZ-9255 crossovers active & do I need outbord crossovers?

2-Is there such a thing as a sub that can/will compliment the seas or Hybrid drivers?

3-I've only 2 inches of clearance for the mid drivers they can be spaced an inch but still very tight, is this problematic?

4-My installer says the speaker wire quality is not an issue. Any thoughts?

Finally, I've heard that this vehicle is a bear to get good SQ. Can this mean that my equipment selection is overkill?

That's all I can think of at the moment, any/all help is greatly appreciated.

THX in advance,

Sam

[Aaron Clinton 2,372]

Hey Sam,

I will try to tackle a few of those questions. #2; any quality sub woofer in the correct enclosure that is not over powering the front stage will blend well. I would suggest a 10" or so driver that falls with in your budget and we can help from there. #4; this is an interesting issue because there are a few people that believe in the esoteric level of cables and wire and feel it makes a difference in sound and clarity. My experience is stay away from the ultra cheap stuff and you will be fine. As for your vehicle, I did drive one (well older then your's) and it is a solid car, but I feel a little sound deadening would help. Especially if you are going to use the equipment you plan on. Maybe in the range of 60^2 foot of Second Skin or RAAMAT to cover the doors and rear hatch would be a great start.

[///M5 2,833]

Sam,

Not quite sure where you are putting these drivers, it is my understanding that the doors on the subbies are hard to fit anything of depth in requiring a rather large build out.

The Clarion is active capable.

Sub integration with what you are buying will be easy.

Not sure I understand what you mean by 2" clearance

Wire is indeed pretty much wire

[samindaup 0]

Denim & M5,

Thank You Very Much for the replies! , M5 , I meant to say that I only have 2"'s of mounting depth to work with but I think I can make it work with 1" spacers and along with both of your input it's time to order some more stuff & get it all put in. Man this oem Forester system is one notch better than a mono 5x7 in a metal dash top. I'm looking forward to hearing the new install. Again, THANKS.

Sam in the U.P.

[///M5 2,833]

Before doing anything, I'd really see what you can fit.

Are you doing a 3 way setup or a 2 way (+sub)?

[bland 0]

Good to see a fellow forester driver. If you go onto the main subaru forester board there are a few audio junkies on there that know what will fit and what doesn't as far a depth goes. For speakers you will need spacers both front a rear for almost anything. There are at least 2 different companies I know of that make some. Not sure if I'm allowed to post links on this board.

As far as sound goes, I mostly do spl with mine, but I can tell you it really keeps the sound in considering I have done no deadening, which is usually really good when it comes to SQ.

Edited June 30, 2008 by bland