subwoofer parts?

[944guy 1]

Hey just have to say this forum is awesome. I have been thinking about trying to make my own driver to put in a transmission line box. I could not find any places that sell parts to build your own driver. I

[///M5 2,833]

It is going to cost you way more than just buying a driver and considering that you aren't modelling or measuring the response your results will be questionable in comparison to buying a pre-designed driver.

[944guy 1]

Its just something I wanted to try to do I don

[Robert_J 0]

Its just something I wanted to try to do I don

[944guy 1]

Yeah basicly thats what i want to do. What motor would you suggest needs to be a 3 or 4 inch vc im going to use on an 8 so the magnet diamiter cant be bigger then 7.5.

[Robert_J 0]

Yeah basicly thats what i want to do. What motor would you suggest needs to be a 3 or 4 inch vc im going to use on an 8 so the magnet diamiter cant be bigger then 7.5.

A TC9 motor will work since it is 7". The TC7 motor that came with my blown sub is 5 7/8".

[944guy 1]

Ok so a TC9 motor now the hard part I think will be to find a basket that is tall enough and can bolt up to the TC9 motor. Any suggestions.

[Robert_J 0]

http://www.lorentz-audio.com/speakerbaskets.html

Take a look at the model numbers for the 4 spoke and 12 spoke basket. Click the search button on the left and put in "speaker basket". Now you have a complete list of baskets. The baskets ending in 89 are 4 spoke and the baskets ending in 94 are 12 spoke.

-Robert

[944guy 1]

I cant get any of the pics to load up there was only two eight

[Robert_J 0]

The 12 spoke 8" basket will be this one - link.

-Robert