Dual 1's aren't dual 1's

[NewGuy 0]

Just got my second BTL and its reading .05 on both.

The first one that came reads 1.0 Plan was to series parallel the 1's.

Send it back?

[dustin420 0]

no its fine, after imp rise it'll be close to 1ohm anyway.

[NewGuy 0]

no its fine, after imp rise it'll be close to 1ohm anyway.

The other sub will rise also.

[audio-neon 34]

Dual 1 coils should read .6-.8 normally. You won't notice a difference when there is power applied.

[jonbearsmt 919]

Dual 1 coils should read .6-.8 normally. You won't notice a difference when there is power applied.

<~~~ .70

[dustin420 0]

well either way nothing you can do about it. it won't affect anything so i wouldn't worry about it.

[shizzzon 461]

it varies.

Dual 1s are between 0.6-0.9

Dual 2s i have seen be 1.2, 1.4, 1.5, 1.6, 1.8, 1.9

Dual 4s i have seen 2.8, 3.0, 3.2, 3.4, 3.6, 3.8, 3.9, 4.0, 4.2

On dual 1s, i have really only seen them be 0.6, 0.7 and 0.9

if ALL 4 coils, 2 per sub, are all reading in between 0.6-0.9 then you are ok.

Series each sub separately then parallel the connections. You should then get 0.7-0.8 ohms.

If you do, then you are all set!

[NewGuy 0]

it varies.

Dual 1s are between 0.6-0.9

Dual 2s i have seen be 1.2, 1.4, 1.5, 1.6, 1.8, 1.9

Dual 4s i have seen 2.8, 3.0, 3.2, 3.4, 3.6, 3.8, 3.9, 4.0, 4.2

On dual 1s, i have really only seen them be 0.6, 0.7 and 0.9

if ALL 4 coils, 2 per sub, are all reading in between 0.6-0.9 then you are ok.

Series each sub separately then parallel the connections. You should then get 0.7-0.8 ohms.

If you do, then you are all set!

Sorry Guys I'm getting .7 on each terminal each woofer. Battery was dying I think. I changed it out and rechecked everything.

Thanks for the insight, I appreciate it.