My little build for now.......

[TeamXdMatt 0]

thanks!

[TeamXdMatt 0]

all i have to say is i'm very pleased with the amps!!! i took 2nd at state finals this past weekend. i have to make the port a lil smaller but my qualifying run it shot up to a 151 real quick in bassrace. i turned it down to be in the 149.9 class. i just need to find the right song. problem is i thought these subs could hold up but they are getting really hot after a bassrace run and these are brand new subs. so i'm going to sell these and i'm on the lookout for some new subs that can take a beating better than these. i plan on trying bassboxing also with this and i know these subs will not last after a 60sec run.

[loudcav 1]

try the Nightshades Mine always seemed to stay cool when I had them in

[stealth 113]

yo i know you know what your doing, but are you using the batteries as ground, id think chassis.

[TeamXdMatt 0]

i have a ground from the front battery going to the back batteries and i have a ground going to the frame.

Edited August 7, 2008 by TeamXdMatt

[TeamXdMatt 0]

try the Nightshades Mine always seemed to stay cool when I had them in

i dont think i have enough power for 6 nightshade 12's. i only have 4 1500's

[loudcav 1]

try the Nightshades Mine always seemed to stay cool when I had them in

i dont think i have enough power for 6 nightshade 12's. i only have 4 1500's

I would think that it would still get down perhaps get jacob to build you a custom set with a diffrent set of spiders to reduce the power handleing a bit

[TeamXdMatt 0]

how much airspace is required for the 12's?

[sundownz 197]

The Nightshades don't need alot of power w/ the stock spiders - thats the good thing about them.

1000 watts each will do nicely, IMO.

You can go as small as 1.5 - 1.75 cubes and larger if you have it on the 12s.

[TeamXdMatt 0]

got bored today so i decided to make trim plates for the back. probably going to wrap it with silver vinyl.

[Duran 387]

i have a ground from the front battery going to the back batteries and i have a ground going to the frame.

With that much power you should have more than one ground. 1/0 Gauge!