Jump to content

Recommended Posts

so i have another question :) ok here it go's. so im gonna be running 2 3000Ds to 2 Fi Btls would it be better to strap the amps together or run each amp unstraped 1 amp to each speaker sepretly?

Share this post


Link to post
Share on other sites

For ease of tuning I would say go strapped. All the gain, crossover and subsonic controls come from one amp. (master)

That's the way I have my 1000D's hooked up, with a chunk of 8g bridging the two and a tiny (mono) RCA for the signal.

Apparently the ams will put out more power wired individually, but I've heard the difference is indistinguishable. Worth a shot if its easy to wire this way I suppose.

Share this post


Link to post
Share on other sites

If there running in there own chamber, running a amp on each is fine.

But if there in the same chamber, this could be bad cause one maybe working harder than the other.

Share this post


Link to post
Share on other sites

STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED

FTW :slayer:

Share this post


Link to post
Share on other sites
STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED

FTW :slayer:

lol i guess you vote strapped

Share this post


Link to post
Share on other sites
If there running in there own chamber, running a amp on each is fine.

But if there in the same chamber, this could be bad cause one maybe working harder than the other.

there in the same chamber speparated by the port but both sides do connect so yeah its just one big box slot port in the middle of the 2 subs what would be the best way to wire them if i where to strap the amps and if straped i would need to wire the 2 for a 2ohm load correct? 1ohm per amp.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×