Sundown E12 Driver

[sundownz 197]

Pics with the little brother, the E8.

Little more info and preliminary T/S specs:

2" coil x 1.57" winding height

1.57" tall magnet stack

0.5" thick top plate

Gap Venting

Basket Window Venting

Pole Venting

High profile foam surround

Paper cone w/ interlocking poly dust cap

Single spider w/ flat, tied down leads

16mm linear one-way x-max

~25 mm one-way x-mech (travel before damage)

300-watt RMS rated power handling

Basket and motor will be BLACK for production. Chrome was easier for the prototype.

Qes: 0.520

Qms: 4.720

Qts: 0.468

Fs: 32.30 Hz

Vas: 55.63 L

Re: 7.26 ohms

BL: 19.47 N/A

Le: 4.47 mH

Specs w/ Coils in series - D4 nominal coils.

Sealed box specs:

1.5 ft^3 = 0.707 Qtc = 50 Hz F3

1.0 ft^3 = 0.798 Qtc = 52 Hz F3

Ported box specs:

2.5 ft^3 tuned to 30 Hz = 27.5 Hz F3 (flat response)

2.5 ft^3 tuned to 35 hz = 30.0 Hz F3 (output bump above 33 Hz)

T/S specs are on the one I put together by hand, so production will vary slightly I'm sure.

[sundownz 197]

Considering offering an intro sale on these for around $100 - how many would be interested?

MSRP will be around $150 - 160 on these when released.

[jonbearsmt 919]

Considering offering an intro sale on these for around $100 - how many would be interested?

MSRP will be around $150 - 160 on these when released.

yeah yeah im ready put me down for 4 of them... i just spoke with my chick she wants 2 and i want 2.. so four

you said 300 rms? and thay are d4s? so for a pair of these an sae 1000 would be a perfect match?

[sundownz 197]

Considering offering an intro sale on these for around $100 - how many would be interested?

MSRP will be around $150 - 160 on these when released.

yeah yeah im ready put me down for 4 of them... i just spoke with my chick she wants 2 and i want 2.. so four

you said 300 rms? and thay are d4s? so for a pair of these an sae 1000 would be a perfect match?

1000D for the pair would work nicely, just keep it turned back a few notches

An SAX-100.2 would also work on a pair quite well.

[bose301s 1]

Hmm, a high roll surround, sexy, but I like the looks of a high roll rubber surround better, lol.

[sundownz 197]

Hmm, a high roll surround, sexy, but I like the looks of a high roll rubber surround better, lol.

WAY too heavy for this driver.

[bose301s 1]

Hmm, a high roll surround, sexy, but I like the looks of a high roll rubber surround better, lol.

WAY too heavy for this driver.

No, I know you definietly have reasons for what you did, a rubber surround just looks better, lol.

[j225 0]

Those look nice when are they going to be available?

[Big E 4]

I've got the proto of these and I love it! I've got it in my room on 150W dayton plate amp and it gets pretty loud! Sounds really good though.

[sundownz 197]

Those look nice when are they going to be available?

Not sure yet - testing interest to see if I should move these up to a higher priority on production.

[Aaron Clinton 2,372]

Going to be a lot of sub for the money.

[sundownz 197]

If Ricky and Jerry get back w/ me and really want to do some big builds with them I will push production to an earlier date.

[audioxtremes 0]

Jacob, please don't count on me buying anything. I have so much going on and so many things spinning in my head.

[sundownz 197]

Jacob, please don't count on me buying anything. I have so much going on and so many things spinning in my head.

Alright, will keep that in mind.

[Rickyharrisjr 0]

If Ricky and Jerry get back w/ me and really want to do some big builds with them I will push production to an earlier date.

I know for sure that I can take 8 of them off of you hands. The current enclosure is set up for 8 12's, thought about putting 8 Sd-1's but these subs look alot beefier. I'll have to wait till I get the truck home before I commit to anything else as I have to make sure that they will fit and decide how quickly I want to rebuild it. I more so want to demo this year than be loud on the mic.

[Rickyharrisjr 0]

So

Rickyharrisjr - 8

BigJon- 4

Come on we need more takers!!!!

[sundownz 197]

Just like the E8 they will take ~3 months or so to come in after production starts. So if you will be in the market around 3 months from now let me know so I can really gauge interest!

[diablo_331 23]

if there was an E10 id be in for 8 of them in a few months

[sundownz 197]

if there was an E10 id be in for 8 of them in a few months

There will be later, but 12s will be first.

[subwoofery 0]

E8 won't be first???

[sundownz 197]

E8 won't be first???

Yes, the E8 is first

Between 10s and 12s, the 12 is first.

[diablo_331 23]

cant wait for 10's