Box build underway.

[chrismcdonald12 0]

Finally picked up a few sheets of MDF to play with to make my explorer box, what should the minimum port area be for 2 15inch RE SX's? So far i have messed around with the RE box tool and came up with a 6.1 Cube box tuned to 34.7hz with a port area of 74square inches. My available measurements seem to be 41 inches wide(before wheel well bumps), 18 inches deep, and i don't want to reach over 20 inches high on the height. If anyone can throw some suggestions at me for the area of port needed or maybe a box design they have used in their explorer it would be much appreciated. Thanks!

[audio-neon 34]

My only suggesion is upping your port area to 16sq inches of port per cubic foot (ie. 6.1 cubic feet and 98 sq. inches of port)