SQ UpGrade

[Lord Baccus 1]

ill let the pics tell the story

Many Thanks too Pierce Audio Products for the Comps

[johnecon2001 82]

Three-way? Nice, you should go active now with the 9887.

I see a Sundown SAX-100.4 and 100.2 in your future.

[aznboi3644 2]

how do those PAP comps sound???

How loud do they get??

[Lord Baccus 1]

so far Clean & Clear as far as loud ill have to wait till i get my new SAZ 3000d amp to compair them with the sub playing...

but was noticable clearer in the Mids & Highs as apposed to the Mb Quart mids & highs were straining to keep up.

but remember the Pap has a 6.5mid and the Mb Quart has a 5.25 mid

overall i am enjoying the clean sound reproduction from the Pap comps.

as for 3 way i have the crossovers nessarry to do this now.

am reading on how to go Active with the 9887

[aznboi3644 2]

I always wondered about those PAP components...for 70 bucks they look like they may be worth a shot

[Lord Baccus 1]

I always wondered about those PAP components...for 70 bucks they look like they may be worth a shot

i went to lunch today and got a chance to really listen to them and the SQ is really Great.

and i did crank em up too see if there was any differance and the more power i put to them the better they did...

really a solid set of Comps...

[///M5 2,833]

Hate to tell you this now, but you should really deaden the insides of your doors as well.

6.5 >> 5.25, nice work!

[Lord Baccus 1]

Hate to tell you this now, but you should really deaden the insides of your doors as well.

6.5 >> 5.25, nice work!

im going to asap...

how do i configure a set of 3way comps ???

do you suggest any special way of wiring the different mids ?

[///M5 2,833]

need to know what processing you have to configure a 3 way anything.

[Lord Baccus 1]

need to know what processing you have to configure a 3 way anything.

thats kind of what i was hoping for info on,

can i rub the PPi 300.4

with the active Alpine 9887 -

using the front ch for the tweeters

and the rear ch for the mids / using 3 sets of crossovers ?

where should i mount the 5.25" mids ?

i have the 6.5" mids in the stock locations w/ tweets shown in pics

where should the smaller mids go ?

do you have any pics of a setup likt that or any diagrams ?

im @ least trying to SQ a lil

i think im getting old...

Edited March 12, 2008 by Lord Baccus

[johnecon2001 82]

You need another two channels.. might just stick with 2-way active for simplicity sake.

[///M5 2,833]

:(

5.25's have no place in a 3 way.

Perhaps we should start from scratch and ask what you are trying to do.

[johnecon2001 82]

"SQL"

rofl

I'd still say stick with 2 way for now, and if you really like the whole Active + SQ realm, then we can help with a gear list.

Usually with a 3-way system you have your tweet (ranging in size from 1"-2"), your midrange(3"-4") and your midbass (often times a 7"-10").

These are just generalizations, there are other sizes people use, but these are the most common.

[Lord Baccus 1]

:(

5.25's have no place in a 3 way.

Perhaps we should start from scratch and ask what you are trying to do.

im just trying to have something that resembles SQ during the week and on the weekend im an SPL Warrior, i switch boxxs for this...

i have a deadicated Fart boxx

and a 7cf box ported @ 36Hz for music

as allways suggestions are welcome

[Lord Baccus 1]

:(

5.25's have no place in a 3 way.

Perhaps we should start from scratch and ask what you are trying to do.

im just trying to have something that resembles SQ during the week and on the weekend im an SPL Warrior, i switch boxxs for this...

i have a deadicated Fart boxx

and a 7cf box ported @ 36Hz for music

as allways suggestions are welcome

bump

[///M5 2,833]

2 way first, 3 way later.