1 fully loaded btl d1 2 1500ds @ 2 ohm

[drapedupDTS 0]

first system about 90% finish, would i need a dual 1 or 2 in this situation, dont wanna go 1 ohm strapped at all since they dont make HO alts for a 2002 deville yet, still looking...

got a chamber t line built by rich that i,ve had for about a year now, 2 1500ds, 100.4 coming

temp. highs i have arc audio fd6000 up front and kenwood excelon coaxils out back on a aura rpm4200 4 chan. clarion max675vd II for the headunit and a clarion equalizer. kicker kyperflex, kollosus 4 guage 4 chan on the way. no alt but i was told that the alts in the 02 devilles and dts really put out about 180-190 amps as told by ohio gen after they tested a few, also adding a powermaster also. thinkin btl but need to know which 1 i need. my first system is almost done. i'm still new to this as u see, but i have some good chit to mess with here.

ALSO, ANY SUGGESTIONS (GOOD OR BAD) WELCOME. I NEED FEEDBACK. IT WOULD BE A SHAME TO SPEND ALL THIS CASH AND fudge UP. thanks in advance.

[jonbearsmt 919]

so you wanna be at 1 ohm or 2 at the amp?

[drapedupDTS 0]

one ohm each, making me 2 ohm strapped

[jonbearsmt 919]

if you wanna get a one ohm load on each sub you would get d2's..........

i dont do much strapping... so i cant help you any further then that,....

[drapedupDTS 0]

only 1 btl 2 amps at 1 ohm, making 2 ohm strapped

[luckydogg72 0]

1 BTL and 2 1500 you would need a d1 woofer to get 2 ohm load

[drapedupDTS 0]

thanks

[fbi90909 0]

^^^

get a D1 BTL and wire it in series for a final 2ohm load.

i'm in the same boat as you with sub/amp.

as you mentioned not strapping to a final 1ohm load because you don't have the alt, it's also not advisable since your going past the amps warranty rating with each amp seeing .5ohm.