Need Box Design Help

[vanquish 0]

Just placed an order for my 15" BL

Anyone willing to help me with a box design?

Trunk Dimensions Estimating: 36 x 36 x 18

width = 36 in.

length = 36 in.

height = 18 in.

Edited February 29, 2008 by lost

[johnecon2001 82]

What would you like it ported to? And how much power are you running?

[vanquish 0]

What would you like it ported to? And how much power are you running?

I'm pretty much clueless when it comes to box specs, i tried to read and learn but its not clicking for me.

Ported to 32-33htz idk how much of a difference between the two would be.

Yet to buy and amp looking @ 1500RMS though

[BKOLFO4 29]

How big is the trunk opening? Can you actually get a 36 x 36 box in the trunk?

I replied to your PM. . .

You could do this:

Just shy of 4 ft^3

36" wide x 18" tall x 17.5" deep

16.5" x 3.5" port, 29.5" long. 32-33 Hz tuning.

[vanquish 0]

How big is the trunk opening? Can you actually get a 36 x 36 box in the trunk?

I replied to your PM. . .

You could do this:

Just shy of 4 ft^3

36" wide x 18" tall x 17.5" deep

16.5" x 3.5" port, 29.5" long. 32-33 Hz tuning.

Hey thanks for the diagram, that helps alot with a visual

I might be pushing it height and width wise but i think it'll fit.

Flared Ports vs the one shown here?

besides the fact that you stated they need less port area.

Could you draw up something with flared ports?

Im considering this option.

[BKOLFO4 29]

If you did a pair of the precision port 4" flared ports, they would need to each be 14.5" long.

If the sub and ports will face rearward, then the box needs to be at least 19.25" deep for rear port clearance.

You could do 16.5" high x 30" wide x 20" deep with a 1.5" thick front baffle (external dimensions).

[vanquish 0]

Sounds good.. but where can i buy theses ports from?

you have a few websites for me

Edited March 3, 2008 by lost

[BKOLFO4 29]

parts express part number 268-352

http://www.partsexpress.com/pe/showdetl.cf...tnumber=268-352

[vanquish 0]

Hate to bug but could you draw me up a design with the two 4" flared ports to the dimensions you've mentioned above. How many ft^3 would that be?