SSD 15 sealed

[dre3k78 0]

I sent an email asking this but never got a reply. I was wondering if i could seal up a SSD 15? If so what would be an ideal size for the enclosure? I checked the specs under the SSD section in the sticky thread but all i could find was "we are still testing sealed enclosures" etc. Thanks.

[johnecon2001 82]

All that information is on Fi's website. Which is probably why you didn't get an email back since it's readily available.

[dre3k78 0]

All that information is on Fi's website. Which is probably why you didn't get an email back since it's readily available.

Could you please show me where? As in a link... This is all the info i was able to find:

SSD15

DUAL 1 | DUAL 2

Fs: 25.9 Hz | 25.3 Hz

Re: 0.75 Ohms/coil | 1.5 Ohms/coil

Qms: 4.78 | 4.89

Qes: .65 | ..58

Qts: .57 | .52

Mms: 246g | 258g

Cms: 0.15mm/N | 0.15mm/N

Sd: 810cm^2 | 810cm^2

Vas: 141.3 l | 141.3 l

Spl: 87.6dB 1W/1m | 87.8dB 1W/1m

Bl: 9.3 N/A | 00.0 N/A

Xmax: 21mm

Rms: 800W

Sealed box: N/A cuft

Ported box: 3-4 cuft @ 33Hz

Sub OD: 15.625”

Cut ID: 14.125”

Mounting depth: 8.000”

Displacement: 0.17cuft

Am i missing something?

Edited February 23, 2008 by KSlice

[johnecon2001 82]

Based on the progression of box sizes for the 10" and the 12", the 15" would be somewhere around a 1^3ft-2.2^3ft.

But if Fi doesn't list it.. it probably isn't recommended to seal the 15" or the 18" SSD.

[BKOLFO4 29]

"We are currently doing testing for sealed boxes, and I will post information if we think that it is ok to use sealed. Otherwise at this point stick to a ported enclosure."

[NDMstang65 403]

I emailed you back..

Give 2 cubes a shot...works good for one of our guys!

Thanks!

-Nick

[dre3k78 0]

Thank you for the email and reply. Ill give 2cF a whirl and see how it does.