Please help with install.

[Hawksfan 0]

Hey guys, I'm really new to car stereo and need some help. I need all the wire, fuses and distro's for my install. I have a couple sundown amps, the 100.4 and the 1000d. For speakers I have a set of components and an Fi Q sub. I'm also looking to upgrade the big three and add a 2nd battery. What do I need to complete the install? I'm looking to purchase this stuff from knukoncepts. Thanks in advance for the help guys.

p.s. The install is in a bmw so the stock batt is already in the trunk.

[johnecon2001 82]

You need 1/0awg from the battery to a Fused distribution block. Then run 4awg from the distro to the amplifiers. Fuse the 1/0awg at 250A and the 4awg at 100A each.

Don't forget the proper crimps or spades to connect all the wire. You'll also need about 50-75ft of 14awg speaker wire.

What head unit do you have?

[Hawksfan 0]

You need 1/0awg from the battery to a Fused distribution block. Then run 4awg from the distro to the amplifiers. Fuse the 1/0awg at 250A and the 4awg at 100A each.

Don't forget the proper crimps or spades to connect all the wire. You'll also need about 50-75ft of 14awg speaker wire.

What head unit do you have?

I have an avic n4