real power of a 40.1 ?

[mcbuggin 1]

has anyone bench tested on of these I have heard on other boards that they compair in output power to a DD Z1 even though they are rated @ 3600 is this true? thanks

[Adrian_D 520]

They're under rated quite a bit

[mcbuggin 1]

They're under rated quite a bit

that's what I've heard do you know what they bench on a 12 volt set up

[Adrian_D 520]

I'm working on building a nice load to be able to test them out...

BUT, as far as the guts look, I'd say somewhere around 5k. On the inside it looks a lot like the AB 500.1.

[mcbuggin 1]

I'm working on building a nice load to be able to test them out...

BUT, as far as the guts look, I'd say somewhere around 5k. On the inside it looks a lot like the AB 500.1.

cool come on taxes

[Adrian_D 520]

What are your plans for it/them ?

You should grab some from ScottieJ, on ca.com or keep your eye out on the spl forums, maybe you can score one even cheaper than Scottie's

[JimJ 11]

I'd rather have one over a Z1 no matter what the power output was compared to it

[Adrian_D 520]

Z1 =

[mcbuggin 1]

Z1 =

I was looking at the ones on here but i'll check out scotty

[BKOLFO4 29]

My new subs will be dual 1 ohm - 1 sub per 40.1 @ 0.5 ohms. Going by my past 3 sub setups in the wall, I am guessing around 0.8-0.9 ohms with impedance rise playing music. Can't wait to see how that works out

[mcbuggin 1]

What are your plans for it/them ?

You should grab some from ScottieJ, on ca.com or keep your eye out on the spl forums, maybe you can score one even cheaper than Scottie's

2 HDc315 for street beat in a bug wired to 1ohm hope to get a 150db will post pics when done. also can I get a link to ScottieJ's ad couldn't find it. thanks

[BKOLFO4 29]

http://www.caraudio.com/forum/showthread.p...699&page=16

[mcbuggin 1]

http://www.caraudio.com/forum/showthread.p...699&page=16

hey thanks for the link I got intouch with him and hopefully he still has one in 2 weeks

[George 0]

according to scottie johnson they do

3600 @ 12.8V

4400-4800 @ 14.4V

and

7500-8000 @ 17V

all value are at 1 ohm. only real testing i have seen thus far.

[ford302redneck 15]

according to scottie johnson they do

3600 @ 12.8V

4400-4800 @ 14.4V

and

7500-8000 @ 17V

all value are at 1 ohm. only real testing i have seen thus far.

I would say these numbers are about as close your gonna get to real output.

[mcbuggin 1]

what are the dimentions of the 40.1? as I don't have much space

[BKOLFO4 29]

they are pretty big: 10.08 W x 25.6 L x 2.71 H

Brian

Edited February 20, 2008 by BKOLFO4

[mcbuggin 1]

they are pretty big: 10.08 W x 25.6 L x 2.71 H

Brian

good will leave me about 10 inches