Nick/Scott or anyone interested/with input

[mjmarovi 8]

I threw an e-mail at Scott a couple days ago, then went on the forum and read the sticky about e-mailing about questions and stuff that aren't orders, sorry. Anyway here's what I wanted to say...

two things, my feedback from my Q15 and a question on a 18 BTL

First of all, absolutely love the Q15 w/bp, an absolute monster, the ported box, 4.8cuft @28hz was just insane, I was blowing away everything else I heard, W7 on a 1000/1 built to "JL specs", and two kicker setups, one pushing 2kw to two 15L5, and one setup pushing 3kw on 2 15L7's!! Because they had significantly more power then me (rf p1000-1bd) the higher bass tones were close, but as soon as it dropped low, I absolutely blew them away!!!

Well, I decided to then swtich my car into an SQ build for hopefully some competitions this summer. It is now sealed in 2.25cuft, and the rest of the build is almost done. Just waiting on a couple key components, but have done a few test runs just with the sub, and dang, 1 15 sealed, whoever says can't be that musical, doesn't know Fi, amazing, tight, accurate, yet still able to drop plenty low and push some hard hitting bass!! love it!!! pictures of new finished install should be coming and finishing my build thread in 1 1/2 weeks.

Now, I got this brilliant idea to get a trailblazer, and have that as more of an SPL daily, and keep the infiniti as an SQ daily.

The build should start in April, which should give me time to finish the current one, get it tuned in, and take care of a couple other things. Well I like to have everything planned ahead so here's what's planned for the lows.

Please tell me if you'd make any changes.

BTL 18 with cooling, and flatwind(which i read on forum is now standard on the BTL, would just like to confirm that, and then would like to add a 3rd magnet and HiXm coil, since this is a loud daily setup. The amp in mind was a sundown audio 3000d. or a RF t2001bd. i know both are very underrated, as I read in the sundown thread that a 3000d tested at like ~3200 watts at 10.75 VOLTS!!!! so i'm guessing ~4kws at 14.4v (i know like it matters)

for box i was thinking 6.5cuft ported to 33hz, with ~110 sq in of port. and if anyone knows what a similar setup has hit in what vehicle as far as DB's, please let me know as I am interested!!

[NDMstang65 403]

We don't have a Hixmax coil in the flat wound, its one or the other...but as far as musical output you'll definitely have more with the BTL 'loaded'

Other then that you should be good to go.

Thanks!

-Nick

[mjmarovi 8]

was wondering about that, i thought, "two different coils on same woofer? maybe a combo??" lol but i don't build woofers for a leaving so i didn't want to question...lol awesome!!! sounds good maybe i will have to get this started earlier then planned