just a buncha pics

[kryptonitewhite 1]

previouse projects:

a ported box we made for 2 12" L5's, tuned as low and as much air space as possable...my motto

4th order S of .7 (as large as possible for flattest/widest responce as opposed to .4, peaked for SPL, narrow passband, highest gain) F3 20Hz...insane...tought me SO much

resin is EXPENSIVE...this box cost over $120!!! Curved corners...priceless

before routered/outside resin

Lanzar OPTI2000D does NOT have soft turn on as advertised. therefore, 2 avalanches were blown by a lanzar amp. Had to cut it out of the box, so it became 5.1 cubic feet poted @21Hz...best box i've ever had.

Edited December 30, 2007 by kryptonitewhite

[kryptonitewhite 1]

makin MDF rings

XX-Colossus I bought from HexiBase

15" Avalanche basket. Got skrewed on recone, never got 2 of them back.

makin a ported box for 2 12" L5's for a friend

rounding a corner more after routered

Lanzar OPTI2000D does NOT have soft turn on/off...it blew my second ava with turn off pop when I didn't have the side on the bandpass...freeair...bottomed out hard. Had to cut the speaker out, converted the 20HURTZ bandpass into a 5.1cube@21Hz ported box. Best box i've ever had. Ran a 15" Type R and 15" MOFO in it.

front of the 15L7 box 3.5cubes@27Hz if i remember right.

without the face on yet

[kryptonitewhite 1]

kinda did a duplicate there on the 5.1@21Hz, owell

similar pic as up there but looks better with speaker cutout

L7done

2 blown avas posing just sitting in 2 boxes

cut that $120 box open

used scotch tape to keep resin off caulk seams

8guage power wires branched off a 4? hell no, thats my speaker wire!easy to hook up the DVC!

that just looks awesome

sounded the same as it did ported though

[kryptonitewhite 1]

she just looks cute in here, prolly makes a better jungle gym anyway

heather's new bed, not so comfy though

Type R in it. It didn't like it, couldn't keep up with the MOFO. Never got to hear an AVA in it freakin tragic

SPV70 feeding the opti, red top under the hood

squares are sexy, squares are good

12's..ghey

MOFO cone vs AVA cone

MOFO basket

R...ghey

[kryptonitewhite 1]

opti CAP that got stolen. I will never run caps again. seriousely, whats the point? EXTRA BATTERIES!

i wanted to keep the cone, Chad said I could. Good thing, I never got my subs back, all i have left now

god the old ones are ugly

shes like a cat, loves to play in boxes! (yeah, she's givin daddy the finner)

ill put some pics of the hyundai here too, why not

expanding foam...every nook and cranny. this car floats now!

[kryptonitewhite 1]

always learning...for instance, 1 gallon isn't enough for 1 window, let alone 2, and even after 13, its just gonna crack anyway. Savin for a welder and sheetmetal now.

mach up to get space ideas

[kryptonitewhite 1]

[kryptonitewhite 1]

sent the poly mids back, tinsel slap, got ripped off on that too

[Adrian_D 520]

Damn, that's a lot of pics.

Sorry to hear about the AA trouble

[kryptonitewhite 1]

you learn as you go, some places just have better service than others. I have nothing but the best of luck with Kicker and Bob at Creative Sound Solutions, where I've learned to avoid Lanzar (Quality Car Audio parent company, owning Pyramid, Pyle, and others too), AA, and obviousely Audiobahn back in my less educated days.

I'm fortunate to have what I have, most of it I didn't earn myself. But the most expensive stuff is yet to come, and I've been working again so....I feel better about it.

Edited December 31, 2007 by kryptonitewhite

[kryptonitewhite 1]

Oh and local shops and best buy and all that. No brick and mortar for me. (sorry all you shop guys )

I hate talkin audio to people around here, all they know is old school stuff or stuff thats in the local shops...the big names. I say "Adire/RE Audio" and their like "HUH?"

[Aaron Clinton 2,372]

Loads of work there.

[theMessenjah44 0]

Lots of very cool pictures man! very nice work!