Is my ported box going to sound bad?

[themerc 0]

Okay. The box is 4 cubes @ 31-32 Hz for an Fi Q15. The box is strangely shaped because a spare tire is going to be standing up vertically behind the box to the right of the port.

This was my plan. I was going to add 2 more vertical 2x4's to the right and left of the sub hole.

The baffle, port, and vertical brace are NOT permanent yet. They haven't been attached yet.

That's what's permanent.

I was told the back wave is going to be fed directly into the port and that usually doesn't work well. Should I change my port? Anything else?

[johnecon2001 82]

Just make a new front baffle and move the cutout to the right?

That would solve whatever problem there might be.

[themerc 0]

So just move the sub as far to the right on the front baffle as possible.

Would the strange shape of my box cause any problems?

[johnecon2001 82]

Unlikely.

[mrray13 30]

i doubt having the box as is will cause any issues. the only problem i can see is that you might get some noise due to the two 90* turns. i would recommend you rounding over the outside and inside edges of the port wall. the inside can be done with a router and roundover bit, the outside with a 45*wedge or roundover the corners with resin and or cut pvc.

otherwise, i'd say good to go.

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee