box

[ABXX49 20]

Just wondering if someone could give me some plans for a ported box. Nick told me to post here and someone would be able to help me....

sub - Fi Q12

amp - TXA 1000-D

max dimensions:

-Height - 16"

-Depth - 18"

-Width - 36"

Thanks,

Ryan

[Lord Baccus 1]

link to T/s for said sub ?

Sq / street beat / SPL ?

[ABXX49 20]

It's just going to be a daily driver. I'm going for some powerful bass, but I don't want to entirely throw SQ out of the door....and I'm not sure I know what T/s means....I'm a noob >.<

[BKOLFO4 29]

I can throw one togther for you. you have more than enough airspace. . . .do you want me to cut length, width, height, or a combination of all three from you max dimension?

I did this box in another thread that would work for you:

It is tuned around 32 Hz. If you want to tune lower, the port could be extended and a little width added to keep the same net airspace.

You have enough airspace for a pair of Q's

Let me know.

Brian

[ABXX49 20]

Yeah, like I said, I'm relatively new to box building and stuff...If that's what you recommend I'll do that.

I should use 3/4" MDF correct? And how much does it cost, roughly?

And were exactly, if using that design, should i mouth the sub? Far left?

[BKOLFO4 29]

what vehicle is this going in?

[ABXX49 20]

1995 Ford Thunderbird

[BKOLFO4 29]

That box will work. Mount the sub in the center of the doubled piece between the port opening and opposite wall.

[BKOLFO4 29]

Since you have room, you could make that box 1" taller. . . .everything else the same. Would give you 2.5 ft^3 tuned to 31-32 Hz.

[ABXX49 20]

Alright, thanks alot man....I really appreciate all the help!

Starting the build tomorrow