Konaki recone kit

[damonhargroves07 0]

kool. im gonna pick some of these up and get them reconed stictly for spl!

[damonhargroves07 0]

they are triple stack indeed. i looked at the picture on caraudio. those subs look like they will be lil powerhouses after a good fi recone

[buickid 0]

Man, these sound enticing. Wheres the best place to get these?

[UNIT 6639 0]

Man, these sound enticing. Wheres the best place to get these?

7elephants.com

[UNIT 6639 0]

Scott/Nick , when I drilled out the 2 bolts to get the basket off, I got metal shavings into the gap (Even though I taped it off) , will this be a problem?

[UNIT 6639 0]

http://i238.photobucket.com/albums/ff131/Decado2/Konaki12004.jpg"]undefined Edited November 30, 2007 by UNIT 6639

[UNIT 6639 0]

oops.

[UNIT 6639 0]

http://i238.photobucket.com/albums/ff131/D...Konaki12003.jpg

[UNIT 6639 0]

http://i238.photobucket.com/albums/ff131/D...Konaki12002.jpg

[UNIT 6639 0]

http://i238.photobucket.com/albums/ff131/D...Konaki12001.jpg

[UNIT 6639 0]

I posted these pics on other forums of the aftermath of me tearing down the sub before I ship it to FI. Figured i would post them up here as well.

[UNIT 6639 0]

Mailing my motor today right after work, will you guys be able to clean the gap out before reconing?

[UNIT 6639 0]

Motor shipped out today, conformation # is 0307 1790 0004 8094 6891 . Could someone let me know when you recieve it.

Also, I sent Nick a pm about getting the gap cleaned out, I got metal shavings in it when 2 of the screws became stripped.

I drilled the screws out, hence the metal shavings, 2 of the bolt holes have a little screw left in them, I hope this will not be a problem.

I will mail a USPS money order on the Friday (12/07/07) for payment of the recone. Please get back to me either through a pm or email me at [email protected] .

Thank you FI

[Fi Car Audio 64]

Shavings? Ewwww.

Yes we will clean it out.

Ill let you know when it comes in and we will get rolling on it ASAP.

Thanks,

Scott

[UNIT 6639 0]

Shavings? Ewwww.

Yes we will clean it out.

Ill let you know when it comes in and we will get rolling on it ASAP.

Thanks,

Scott

, thanks Scott , I am going to go ahead and prepay for everything Nick quoted me.

I am all excited, I can't wait to get my subs built and installed !!!!

[UNIT 6639 0]

Sorry Scott, tried to pm you but your box is full.

[onebadmonte 235]

Keep us posted on the results of your recone. I'm thinking of doing something similar, but keeping it a 12. Thanks.

[UNIT 6639 0]

Will do

[UNIT 6639 0]

Payment sent for recones , please let me know when it shows.

[citrate 0]

hey dude, i sent ya a pm regarding your konaki basket, lemme know!

[UNIT 6639 0]

Hey guys, did the motor show up to you yet.

[UNIT 6639 0]

Did it show up yet guys?

[Fi Car Audio 64]

Need to send you an email about this one... received the box the other day, with nothing but 2 pieces of foam in it. I put in a claim through the postal service for it and they have a description and are trying to track it down. Apparently the top and bottom of the box were taped with that reinforced tape, but the motor flew out the side of the box. I know you have insurance on it and I need to get all your info together for them.

Bad times with this one... sorry

Ill keep you posted.

[onebadmonte 235]

Bummer man. I was really looking foward to reading about the out come. Can anyone at Fi Audio Guesstimate the performance of a reconed Konaki sub. I'm looking for a high out put daily sub on the cheap. Thanks.

[Fi Car Audio 64]

Problem is the cooling. It truly isnt a DD sub for cheap. Cooling is a bust on that motor. We can get it to handle plenty of power through soft parts for SPL, but cooling for daily is another story.