SSD's ported?

[menikmati 0]

Hi, I currently have the SSD's w/ copper coil in about a cube sealed. My buddy had a box, 3.5 @ 32hz I believe, that he said I could use if I needed. Would that box be good for the SSD's or will it be too small? I could use the slight bump in output, unless the box is too small.

[bigjae1976 0]

What size are your subs?

[menikmati 0]

Ah, guess I forgot to mention. 2 12"

[NDMstang65 403]

Ported box we recommend using 1.8-2.5 cubic feet @ 33Hz (this is optimal in our eyes and to our ears, you can tune 31-35hz fine if you so please)

That's kind of on the small side of things, How much vent area does it have?

[menikmati 0]

52 sq. inches he says.

[tejcurrent 13]

That would seem to be enough port area (max recommended for that airspace is about 56sqin), but that box is on the small side. I would give them more air than that, but you could always try it with the thought that you still should build a bigger one. It will give you an increase in output, but it will sound pretty different from the sealed box you currently have.

Edited October 17, 2007 by tejcurrent

[NDMstang65 403]

You could always try it and see what it sounds like, worse comes to worse all you have to do is build another enclosure .

Thanks!

-Nick