IA Death Penalty Arrives for Testing!

[splblazer98 1]

Not much else to say here, other than after the long wait this subwoofer is definitely worth the wait. Look for some testing results in the next 2 or 3 days

I believe it weighs in around 60-70lbs

[splblazer98 1]

[splblazer98 1]

sexy dust cap glue joint

[splblazer98 1]

[splblazer98 1]

Ok so its raining out and i got called in to work for the next 2 days, so i cant test today or tommorrow. GRR, anyways i did snag a couple more pics this morning before I got called in

i really dont think you guys know how large this thing really is

DP on left MT on right

RE 8 VS DP

2 Slug SPL BTL motor VS DP

[Aaron Clinton 2,372]

Nice pictures.

[vladd 26]

not my kind of sub at all but it is sexy, i like the basket too.

[splblazer98 1]

You and jim should come up and give her a listen and watch me shove a few kw down its throat

[vladd 26]

when you plan on actually tearing in to it? I might be free sunday if we don't end up at dave's, but saturday is beer fest

[X-OvrDistortion 0]

I have always been a fan of the 12 spoke basket, but I do really like the looks of this one too. At least Nick didnt go with a 4 spoke basket. It is possible the ugliest of all time, with the RE XXX (new style) coming in a close tie.

[lee 2]

That 8 spoke basket is now officially my favorite basket style

[MIKENEUFELD 0]

let's get some testing done. I need tosee what this woofer can do...

[Mark LaFountain 1,054]

wish I* could make it over for that one, hehe

[splblazer98 1]

Sealed on the dash, 2.2 cubes 2 4" aeros tuned to 40 hz.

The DP is 3db louder than the DC audio sub i tested in that same box, with the same power, but it is 20 hz higher

Theres the results so far. back to work

Charging batts and fixing some odds and ends withthe electrical then back to testing in a bit

VIDEO HERE!!!

http://www.teamssaudio.com/video/play.php?vid=136

http://www.teamssaudio.com/video/play.php?vid=137

[BKOLFO4 29]

What amp(s) are you using to get 3000 watts at 5 ohms? 122 volts is dangerous on the outputs

Thanks!

Brian

Edited October 10, 2007 by BKOLFO4