Jump to content
Sign in to follow this  
kingsham

My idea of a sq setup...my first car audio setup ever...

Recommended Posts

First let me start by saying...im only 16 and this will be going in my first car! :):):)

I was super confused on what sub setup to go with...so i will be going with a single 12 ported tuned to 30hz...which is pretty low in my opinion. The two subs i have in mind are the SSA Icon and the FI Q. The Q box would be 2.5 cu ft. net, the ICON box would be 2.25 cu ft. net. I feel as though these subs will give me excelent SQ with an ability to jus flat out wang from time to time.

My car is a 1977 Buick Regal. As of right now the front doors have severe leakage problems...especially the front passenger door. Because of this problem...i was thinking about running a rear fill. Probably a 6.5 component set...maybe a GOOD set of coaxials because of a lower budget. I probably could fabricate some custom kick pannels for the fronts and mount the tweeter in the dash or maybe right behind the front seat in the upper quarter, where the side interior lights are, or something like that. I have some sets on mind like these...

component

http://sonicelectronix.com/item_5144_Clif+...gns+PX650C.html

http://sonicelectronix.com/item_9319_Infin...nce+6020CS.html

http://sonicelectronix.com/item_9115_Kenwo...KFC-X1710P.html

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=17540

http://www.woofersetc.com/index.cfm?fuseac...Product_ID=3059

http://www.woofersetc.com/index.cfm?fuseac...Product_ID=5207

http://www.woofersetc.com/index.cfm?fuseac...Product_ID=2950

coaxials

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=14525

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=11401

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=17764

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=15357

http://sonicelectronix.com/item_5150_--+CR...gns+QX6550.html

I also plan to get a good dampener...like some RAAMAT

I was thinking of maybe running the componets/coaxials off of the head units power...but probably an amp

a 2 channel like these

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=17890

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=17038

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=11692

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=14320

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=16325

and a sub amp like...

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=16338

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=16367

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=17847

http://sonicelectronix.com/item_9391_Clif+...+CD10.1DLX.html

http://sonicelectronix.com/item_7369_Power...SA+1000.1D.html

http://sonicelectronix.com/item_8731_Light...S4.1000.1D.html

i know its alot of info but am i going in the right direction?

Share this post


Link to post
Share on other sites

For an SQ set up, ditch the rears, put all of that money into the front stage, definitely amp the front stage, and deaden well.

Share this post


Link to post
Share on other sites

I agree with acidburn 100%. In particular if you are budget limited at all rears are completely stupid. Also do remember that if SQ is truly your goal you will have some installation work ahead of you. Lots of deadening, baffles, sealing off holes in the doors. It isn't hard, but it is time consuming and also really, really, really worth it.

I must also say that I didn't click on all the links, but would have read through a list of components...

Share this post


Link to post
Share on other sites

only reason i suggested the rear fill is becuase my doors have leakage problems, but i may be able to fabricate some custom kick pannels.... i will post pics later

Share this post


Link to post
Share on other sites

If it leaks to outside that is actually a benefit, the inside leaks are easy to fix with some material and deadening. Either way you are WAY better off without anything in the rear.

Are you going to list the components you are looking at?

Share this post


Link to post
Share on other sites

Cmon...why do you have to clown my english. If you actually knew me...you'd know i dont really talk like that...but no big deal.

Ok I will go ahead and list the components

Clif Designs PX650C

Infinity Reference 6020CS

Kenwood eXcelon KFC-X1710P

Phoenix Gold RSd65cs

CDT Audio KA-61 - CDT Audio Kama K-Series

CDT Audio CL-S60A - CDT Audio Classic

Edited by kingsham

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×