kick pod question

[SouthPole1989 0]

hi, i am thinking of using kick pods for my componots since they are too deep for my stock location ( they are re audio xxx comonopots) and i am wondering i was thinking of putt ing in some midbass drivers in the stock location in the door. know will that affect anything since there will only belike 4 inches seperating the componots and the midbass drivers.

[ANeonRider 3]

http://www.soundsolutionsaudio.com/forum/i...7964&st=150

The affect will be that you will have a good soundstage & killer midbass.

Question is, if the components can't fit in the doors, how will midbass drivers? Also, normally a good 2-way driver doesn't make that ideal of a 3-way driver.

[///M5 2,833]

I love the idea of a midbass in the door but hate the idea of using the xxx as a midrange. It really would be better to sell what you have and start from scratch if you go the three way route.

[SouthPole1989 0]

which brand would you recommend that is not rainbow or focal ( price) unless they are no more then 300 a set and i would like them to get fairly loud since it will have to compete with around 1500 watts of bass.

[///M5 2,833]

For $300 and passive, I'd recommend a 2 way and not a 3.

[SouthPole1989 0]

For $300 and passive, I'd recommend a 2 way and not a 3.

yea i know but i want more midbass thats the thing.

i was thinking of either using an eu 700 or the mach 5 audio mli 65 for the midbass.

or go with something like this. http://www.woofersetc.com/index.cfm?fuseac...Product_ID=2869

and use the xxx's for rear fill cause i already tired selling them on Roe and no offered cash only trades and the only trade that didn't envolve more from me was a very used 12w7